Hello Raphael, Thank you for replying. This morning I discovered what the problem was. It was the BIOS settings for the parallel port, which had been set to EPP mode. When I changed it to "bi-directional" mode, things started working.
Best regards, Jon Benediktsson Marel hf. Raphael Bossek <raphael.bossek at solutions4linux.de> on 22/02/2000 10:48:56 To: jonb at marel.is cc: psosuser at isi.com, linuxppc-embedded at lists.linuxppc.org Subject: Re: 8xxFADS and SingleStep BDM hi Jon, > Does anyone have these tools working with 8xxFADS ? yes, we use SingleStep Debugger throught the BDM interface connencted to MPC823e PILOT board successfully :) i also used the FlashUtility to get the 8xxROM working with the 823e stuff so it should not be the problem! > I would be interested in sharing the config files. some screenshot will help perhaps too but at the moment i don't have access to the configuration (ill at home :( so be patient... -- Raphael Bossek <raphael.bossek at solutions4linux.de> [ICQ #40047651] PGP fingerprint: DF 6F 2C 76 46 1E B4 1C 5B A5 2E 1B FC E0 D3 F6 PGP public key: http://www.solutions4linux.de/private/pgpkey.asc ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
