On Friday 21 October 2005 16:39, Kumar Gala wrote: > > On Oct 21, 2005, at 7:21 AM, Nathael PAJANI wrote: > > > Hi all! > > > > I'm working on a port of linux (2.6.13-2) on an Actis-computer board, > > based on the Freescale MPC8560 Processor. > > > > I solved the problems I had with the init process, and I actually have > > the console (SCC1) and one ethernet controler (FCC3) running. > > > > I will now go on with the Three-Speed Ethernet Controler, and there > > actually seem to be no support for it, but maybe I did not look at the > > right place? > > The TSEC has been supported for a long time. The driver is call > gianfar (drivers/net/gianfar*). > > > I got another question, about the FCC driver: it uses a "big" > > structure > > "fcc_enet_t" wich seems to be aimed at stats. This is initialised, > > but I > > did not find where this is used. Is it? > > The FCC enet driver has been completely rewritten recently and is in > the process of being accepted into the kernel. Hopefully one of the > guys with more knowledge on the details will be able to help you on > the specifics. >
fcc_enet_t is in the CPM parameter area. It is used but the statistics it provides are not, since we properly update the linux net device stats manually. > - kumar > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > Regards Pantelis