Wolfgang, As I told you, I tried to produce the U-boot, but I am nont confident on the version (1.0.0). Could you suggest me the latest stale version I must get?
Thanks Best Regards, Agostino Sette TechnoLabs Department of Innovation Software3 S.S. 17 Localit? Boschetto 67100 L' Aquila (Italy) Tel: (+39) 0862 344.557 Fax: (+39) 0862 344.623 e-mail: Agostino.Sette at siemens.com -----Original Message----- From: wd at denx.de [mailto:[EMAIL PROTECTED] Sent: marted? 8 novembre 2005 10.09 To: Sette Agostino Cc: linuxppc-embedded at ozlabs.org Subject: Re: PPCBoot 2.0.0 Errors In message <69DF49BE936F4441980EC1D59F0ADC2F0108C267 at aqlby02a.siemens.it> you wrote: > > I agree with you concerning the PPCBoot. In fact in other boards we are using U-Boot. > We tried to use U-Boot for MPC859 but we had some problems we are trying to > solve. You cannot solve these problems by downgrading to PPCBoot. The 852/859/866 processors are definitelu *not* supported by PPCBoot - the required changes of the clock handling were added much later. You *must* use U-Boot. > As far as you know to change the boot or the kernel on cards in field is not > so easy :-( You mean you shipped boards to customers in the field in a state where you did not even decide for a final version of the boot loader? Gosh... > We found an unexpected beahviour regarding the Linux time tick. ...whichis probablky cause by using PPCBoot which does not understand to deal with a 859. > Another interesting point is that the same kernel works well on other TQM8xx > modules, but not fot TQM859. U-Boot is running perfectly fine on the TQM859 - we have these boards here in our virtual lab; they are tested on a regular base. > I will try to introduce the U-Boot, but I am not confident it will solve the > problem, what do you think about it? I can *guarantee* you that PPCBoot is definitely worse on your hardware. > Last question, which is the appropriate mailing list? u-boot-users Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Always leave room to add an explanation if it doesn't work out.
