Hello all, I am loading a linux kernel onto ML310 board .I want networking support and hence I have a pci enabled design. I am using linux 2.4 powerpc devel kernel. I have also tried the montavista previewkit But I end up with the same problem. I have enabled the option " support for early boot texts: in the kernel debugging. Now once run the kernel program in powerpc I get the following essages in the serial minicom terminal Enter Desired System ACE CF Configuration <0-7>. 0: ACE-loader. 1: Linux w/PCI. 2: VxWorks w/PCI. 3: QNX Demo. 4: Linux EDK Base Build. 5: VxWorks EDK Base Build. 6: User Configuration A. 7: User Configuration B.
Select: loaded at: 00400000 008CB1E0 board data at: 008C8138 008C8150 relocated to: 00405308 00405320 zimage at: 00405813 004DE42A initrd at: 004DF000 008C7382 avail ram: 008CC000 10000000 Linux/PPC load: console=ttyS0,9600 root=/dev/xsysace/disc0/part2 rw Uncompressing Linux...done. Now booting the kernel The prompt goes dead at this point.The board details is available at www.xilinx.com/ml310 <http://www.xilinx.com/ml310> Any workarounds? Thanks, Nitesh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051109/d97caa1b/attachment.htm
