srideep.devireddy at wipro.com wrote: > Hi Sir , > > > > With the help of mailing list I am able to get my u-boot 1.1.3 > version ? right held up with kernel > > ?. > > I am able to boot my MPC8272ADS with u-boot 1.1.3 version . how can > build my uImaze(compressed linux image so that I can boot it ) ,what are > the options .. I got the source from Montavista BSP for MPC 8272 .. so > can you guide me in making a compressed image so that I can boot my > Linux kernel . > > > > As of now I am getting and error of > > > > ## Booting image at 01000000 ... > > > > Image Name: Linux-2.4.22 > > > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > > > Data Size: 782360 Bytes = 764 kB > > > > Load Address: 00000000 > > > > Entry Point: 00000000 > > > > Verifying Checksum ... OK > > > > Uncompressing Kernel Image ... OK > > > > > > That?s it ... kernel hangs .. why is this ? can you kindly help me > resolving in the issue > Do you have console=ttyCPM0,115200 in your bootargs? Anyway, what kernel (version) is used, what config file?
The output of the u-boot printenv command will be helpful as well. > > > > > Best Regards > > > > > > Confidentiality Notice > > The information contained in this electronic message and any attachments > to this message are intended > for the exclusive use of the addressee(s) and may contain confidential > or privileged information. If > you are not the intended recipient, please notify the sender at Wipro or > Mailadmin at wipro.com immediately > and destroy all copies of this message and any attachments. > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded -- Sincerely, Vitaly
