Srideep, I have never used the BDI 2000 with the MPC8272, however, I can tell you that configuring your emulator for your specific board, if the manufacturer does not provide a *verified* configuration for it, is something that takes some time and a few variables to tweak.
Maybe you can expect to find a configuration ready made for some Motorola prototype board like the ADS 8272, *but* it would be a mistake to assume that that maps directly to your hardware in a workable manner. Bottom line, you need to know exactly what all of the emulator knobs are, and, if this is new hardware, keep in mind that it [the new hardware] could be malfunctioning. Do not assume the hardware is operating as a reliable computer unless you have positive proof that is the case - my personal experience is that I tried to make an emulator work on hardware that someone above me kept insisting "had to be working" - which was not the case. I got plenty of frustration and nothing to show for it - I should have defended the case that the hardware was not working much harder than I did 8) Anyway.. I am digressing. How is your BDI 2000 behaving ? I was using an "Embedded Toolsmiths" emulator, by the way. -f On Wed, 2005-10-12 at 17:14 +0530, srideep.devireddy at wipro.com wrote: > Hi , > > I am srideep , we have problem in programming flash on MPC 8272 > ADS file using BDI 2000 with linux as host. As I am new to this I > need your help in this regard. > > > > We have connected the BDI2000 to MPC8272ADS board. We are working on > linux & I have attached configuration file for 8272 ADS board . > > BDI 2000 could recognize the processor type. > > But when we try to program the flash (with uboot binary image ) at > location 0xff800000 on MPC 8272ADS evaluation board, it failed to > program, > > We tried to unlock and do the same but still left with the same error. > > But when we tried to program in any other location it programmed but > it doesnt boot . > > Can you kindly send us the working configuration file. > > > > > > Thanks & Regards > > Srideep Reddy D > > Software Engineer > > Telecom solutions > > Wipro Technologies > > 91-44-30691952 > > > > > > > Confidentiality Notice > > The information contained in this electronic message and any > attachments to this message are intended > for the exclusive use of the addressee(s) and may contain confidential > or privileged information. If > you are not the intended recipient, please notify the sender at Wipro > or Mailadmin at wipro.com immediately > and destroy all copies of this message and any attachments. >
