This adds board-specific files needed to utilize fs_enet Ethernet driver
for MPC885ADS and MPC866ADS.
Signed-off-by: Vitaly Bordug <vbordug at ru.mvista.com>
---
arch/ppc/Kconfig | 47 ++++
arch/ppc/platforms/Makefile | 2
arch/ppc/platforms/fads.h | 2
arch/ppc/platforms/mpc866ads_setup.c | 283 ++++++++++++++++++++++++
arch/ppc/platforms/mpc885ads_setup.c | 400 ++++++++++++++++++++++++++++++++++
include/asm-ppc/io.h | 7 +
6 files changed, 740 insertions(+), 1 deletions(-)
create mode 100644 arch/ppc/platforms/mpc866ads_setup.c
create mode 100644 arch/ppc/platforms/mpc885ads_setup.c
applies-to: d2cd86c706af9e6ad47e2dda6b24df0d93f6f98f
fa40f206175e866edd27507148c61a90b665c8db
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 8fa51b0..8e6fcb2 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -506,6 +506,53 @@ config WINCEPT
endchoice
+menu "Freescale Ethernet driver platform-specific options"
+ depends on FS_ENET
+
+ config MPC8xx_SECOND_ETH
+ bool "Second Ethernet channel"
+ depends on (MPC885ADS || MPC86XADS)
+ default y
+ help
+ This enables support for second Ethernet on MPC885ADS and MPC86xADS
boards.
+ The latter will use SCC1, for 885ADS you can select it below.
+
+ choice
+ prompt "Second Ethernet channel"
+ depends on MPC8xx_SECOND_ETH
+ default MPC8xx_SECOND_ETH_FEC2
+
+ config MPC8xx_SECOND_ETH_FEC2
+ bool "FEC2"
+ depends on MPC885ADS
+ help
+ Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+ (often 2-nd UART) will not work if this is enabled.
+
+ config MPC8xx_SECOND_ETH_SCC1
+ bool "SCC1"
+ depends on MPC86XADS
+ select MPC8xx_SCC_ENET_FIXED
+ help
+ Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
+
+ config MPC8xx_SECOND_ETH_SCC3
+ bool "SCC3"
+ depends on MPC885ADS
+ help
+ Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
+
+ endchoice
+
+ config MPC8xx_SCC_ENET_FIXED
+ depends on MPC8xx_SECOND_ETH_SCC
+ default n
+ bool "Use fixed MII-less mode for SCC Ethernet"
+
+endmenu
+
choice
prompt "Machine Type"
depends on 6xx || POWER3 || POWER4
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index 7c5cdab..cce6487 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -45,6 +45,8 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o
obj-$(CONFIG_SPRUCE) += spruce.o
obj-$(CONFIG_LITE5200) += lite5200.o
obj-$(CONFIG_EV64360) += ev64360.o
+obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
+obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
ifeq ($(CONFIG_SMP),y)
obj-$(CONFIG_PPC_PMAC) += pmac_smp.o
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index a48fb8d..e1c0b1b 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -112,7 +112,7 @@
/* CPM Ethernet through SCC1 or SCC2 */
-#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */
+#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1)
/* Probably 860
variant */
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC1 use.
* TCLK - CLK1, RCLK - CLK2.
diff --git a/arch/ppc/platforms/mpc866ads_setup.c
b/arch/ppc/platforms/mpc866ads_setup.c
new file mode 100644
index 0000000..0809cf3
--- /dev/null
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -0,0 +1,283 @@
+/*arch/ppc/platforms/mpc885ads-setup.c
+ *
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug at ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/mii.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/ppcboot.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/ppc_sys.h>
+#include <asm/mpc8xx.h>
+
+extern unsigned char __res[];
+
+static struct fs_mii_bus_info fec_mii_bus_info = {
+ .method = fsmii_fec,
+ .id = 0,
+};
+
+static struct fs_mii_bus_info scc_mii_bus_info = {
+ .method = fsmii_fixed,
+ .id = 0,
+ .i.fixed.speed = 10,
+ .i.fixed.duplex = 0,
+};
+
+static struct fs_platform_info mpc8xx_fec_pdata[] = {
+ {
+ .rx_ring = 128,
+ .tx_ring = 16,
+ .rx_copybreak = 240,
+
+ .use_napi = 1,
+ .napi_weight = 17,
+
+ .phy_addr = 15,
+ .phy_irq = -1,
+
+ .use_rmii = 0,
+
+ .bus_info = &fec_mii_bus_info,
+ }
+};
+
+static struct fs_platform_info mpc8xx_scc_pdata = {
+ .rx_ring = 64,
+ .tx_ring = 8,
+ .rx_copybreak = 240,
+
+ .use_napi = 1,
+ .napi_weight = 17,
+
+ .phy_addr = -1,
+ .phy_irq = -1,
+
+ .bus_info = &scc_mii_bus_info,
+};
+
+void __init board_init(void)
+{
+ volatile cpm8xx_t *cp = cpmp;
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+ if (bcsr_io == NULL) {
+ printk(KERN_CRIT "Could not remap BCSR1\n");
+ return;
+ }
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
+ clrbits32(bcsr_io,(0x80000000 >> 7));
+#else
+ setbits32(bcsr_io,(0x80000000 >> 7));
+
+ cp->cp_pbpar &= ~(0x000000c0);
+ cp->cp_pbdir |= 0x000000c0;
+ cp->cp_smc[0].smc_smcmr = 0;
+ cp->cp_smc[0].smc_smce = 0;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cp->cp_simode &= ~(0xe0000000 >> 1);
+ cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
+ clrbits32(bcsr_io,(0x80000000 >> 13));
+#else
+ clrbits32(bcsr_io,(0x80000000 >> 13));
+ cp->cp_pbpar &= ~(0x00000c00);
+ cp->cp_pbdir |= 0x00000c00;
+ cp->cp_smc[1].smc_smcmr = 0;
+ cp->cp_smc[1].smc_smce = 0;
+#endif
+ iounmap(bcsr_io);
+}
+
+static void setup_fec1_ioports(void)
+{
+ immap_t *immap = (immap_t *) IMAP_ADDR;
+
+ setbits16(&immap->im_ioport.iop_pdpar, 0x1fff);
+ setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
+}
+
+static void setup_scc1_ioports(void)
+{
+ immap_t *immap = (immap_t *) IMAP_ADDR;
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+ if (bcsr_io == NULL) {
+ printk(KERN_CRIT "Could not remap BCSR1\n");
+ return;
+ }
+
+ /* Enable the PHY.
+ */
+ clrbits32(bcsr_io,BCSR1_ETHEN);
+
+ /* Configure port A pins for Txd and Rxd.
+ */
+ /* Disable receive and transmit in case EPPC-Bug started it.
+ */
+ setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
+ clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+ clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD);
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
+ clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
+ setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+ /* Configure port A for TCLK and RCLK.
+ */
+ setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
+ clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
+ clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
+ clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
+
+ /* Configure Serial Interface clock routing.
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+ clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
+ setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
+
+ /* In the original SCC enet driver the following code is placed at
+ the end of the initialization */
+ setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
+ setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
+
+}
+
+static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
+{
+ struct fs_platform_info *fpi = pdev->dev.platform_data;
+
+ volatile cpm8xx_t *cp;
+ bd_t *bd = (bd_t *) __res;
+ char *e;
+ int i;
+
+ /* Get pointer to Communication Processor */
+ cp = cpmp;
+ switch (fs_no) {
+ case fsid_fec1:
+ fpi = &mpc8xx_fec_pdata[0];
+ fpi->init_ioports = &setup_fec1_ioports;
+
+ break;
+ case fsid_scc1:
+ fpi = &mpc8xx_scc_pdata;
+ fpi->init_ioports = &setup_scc1_ioports;
+
+ break;
+ default:
+ break;
+ }
+
+ pdev->dev.platform_data = fpi;
+ fpi->fs_no = fs_no;
+
+ e = (unsigned char *)&bd->bi_enetaddr;
+ for (i = 0; i < 6; i++)
+ fpi->macaddr[i] = *e++;
+
+ fpi->macaddr[5 - pdev->id]++;
+
+}
+
+static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
+ int idx)
+{
+ /* This is for FEC devices only */
+ if (strcmp(pdev->name, "fsl-cpm-fec"))
+ return;
+ mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
+}
+
+static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
+ int idx)
+{
+ /* This is for SCC devices only */
+ if (strcmp(pdev->name, "fsl-cpm-scc"))
+ return;
+
+ mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
+}
+
+static int mpc866ads_platform_notify(struct device *dev)
+{
+ static struct {
+ const char *bus_id;
+ void (*rtn) (struct platform_device * pdev, int idx);
+ } dev_map[] = {
+ {
+ "fsl-cpm-fec", mpc866ads_fixup_fec_enet_pdata}, {
+ "fsl-cpm-scc", mpc866ads_fixup_scc_enet_pdata},};
+ struct platform_device *pdev;
+ int i, j, idx;
+ const char *s;
+ if (dev && dev->bus_id)
+ for (i = 0; i < ARRAY_SIZE(dev_map); i++) {
+ idx = -1;
+
+ if ((s = strrchr(dev->bus_id, '.')) != NULL)
+ idx = (int)simple_strtol(s + 1, NULL, 10);
+ else
+ s = dev->bus_id;
+ j = s - dev->bus_id;
+ if (!strncmp(dev->bus_id, dev_map[i].bus_id, j)) {
+ pdev =
+ container_of(dev, struct platform_device,
+ dev);
+ dev_map[i].rtn(pdev, idx);
+ }
+ }
+ return 0;
+}
+
+int __init mpc866ads_init(void)
+{
+ printk(KERN_NOTICE "mpc866ads: Init\n");
+
+ platform_notify = mpc866ads_platform_notify;
+
+ identify_ppc_sys_by_name(BOARD_CHIP_NAME);
+
+ ppc_sys_device_remove(MPC8xx_CPM_FEC2);
+ ppc_sys_device_remove(MPC8xx_CPM_SCC3);
+ ppc_sys_device_remove(MPC8xx_CPM_SCC2);
+ ppc_sys_device_remove(MPC8xx_CPM_SCC4);
+ ppc_sys_device_remove(MPC8xx_CPM_SMC1);
+ ppc_sys_device_remove(MPC8xx_CPM_SMC2);
+
+ return 0;
+}
+
+arch_initcall(mpc866ads_init);
diff --git a/arch/ppc/platforms/mpc885ads_setup.c
b/arch/ppc/platforms/mpc885ads_setup.c
new file mode 100644
index 0000000..5e72f64
--- /dev/null
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -0,0 +1,400 @@
+/*arch/ppc/platforms/mpc885ads-setup.c
+ *
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug at ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/mii.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/ppcboot.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/ppc_sys.h>
+
+extern unsigned char __res[];
+
+static void __init mpc885ads_scc_phy_init(char);
+
+static struct fs_mii_bus_info fec_mii_bus_info = {
+ .method = fsmii_fec,
+ .id = 0,
+};
+
+static struct fs_mii_bus_info scc_mii_bus_info = {
+#ifdef CONFIG_SCC_ENET_8xx_FIXED
+ .method = fsmii_fixed,
+#else
+ .method = fsmii_fec,
+#endif
+
+ .id = 0,
+};
+
+static struct fs_platform_info mpc8xx_fec_pdata[] = {
+ {
+ .rx_ring = 128,
+ .tx_ring = 16,
+ .rx_copybreak = 240,
+
+ .use_napi = 1,
+ .napi_weight = 17,
+
+ .phy_addr = 0,
+ .phy_irq = SIU_IRQ7,
+
+ .bus_info = &fec_mii_bus_info,
+ }, {
+ .rx_ring = 128,
+ .tx_ring = 16,
+ .rx_copybreak = 240,
+
+ .use_napi = 1,
+ .napi_weight = 17,
+
+ .phy_addr = 1,
+ .phy_irq = SIU_IRQ7,
+
+ .bus_info = &fec_mii_bus_info,
+ }
+};
+
+static struct fs_platform_info mpc8xx_scc_pdata = {
+ .rx_ring = 64,
+ .tx_ring = 8,
+ .rx_copybreak = 240,
+
+ .use_napi = 1,
+ .napi_weight = 17,
+
+ .phy_addr = 2,
+#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED
+ .phy_irq = -1,
+#else
+ .phy_irq = SIU_IRQ7,
+#endif
+
+ .bus_info = &scc_mii_bus_info,
+};
+
+void __init board_init(void)
+{
+ volatile cpm8xx_t *cp = cpmp;
+ unsigned int *bcsr_io;
+
+#ifdef CONFIG_FS_ENET
+ immap_t *immap = (immap_t *) IMAP_ADDR;
+#endif
+ bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+ if (bcsr_io == NULL) {
+ printk(KERN_CRIT "Could not remap BCSR\n");
+ return;
+ }
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
+ clrbits32(bcsr_io, BCSR1_RS232EN_1);
+#else
+ setbits32(bcsr_io,BCSR1_RS232EN_1);
+ cp->cp_smc[0].smc_smcmr = 0;
+ cp->cp_smc[0].smc_smce = 0;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cp->cp_simode &= ~(0xe0000000 >> 1);
+ cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
+ clrbits32(bcsr_io,BCSR1_RS232EN_2);
+#else
+ setbits32(bcsr_io,BCSR1_RS232EN_2);
+ cp->cp_smc[1].smc_smcmr = 0;
+ cp->cp_smc[1].smc_smce = 0;
+#endif
+ iounmap(bcsr_io);
+
+#ifdef CONFIG_FS_ENET
+ /* use MDC for MII (common) */
+ setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
+ clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
+#endif
+}
+
+static void setup_fec1_ioports(void)
+{
+ immap_t *immap = (immap_t *) IMAP_ADDR;
+
+ /* configure FEC1 pins */
+ setbits16(&immap->im_ioport.iop_papar, 0xf830);
+ setbits16(&immap->im_ioport.iop_padir, 0x0830);
+ clrbits16(&immap->im_ioport.iop_padir, 0xf000);
+ setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);
+
+ clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
+ setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
+ clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
+ setbits32(&immap->im_cpm.cp_pepar, 0x00000003);
+
+ setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
+ clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
+ clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
+}
+
+static void setup_fec2_ioports(void)
+{
+ immap_t *immap = (immap_t *) IMAP_ADDR;
+
+ /* configure FEC2 pins */
+ setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
+ setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
+ setbits32(&immap->im_cpm.cp_peso, 0x00037800);
+ clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
+ clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
+}
+
+static void setup_scc3_ioports(void)
+{
+ immap_t *immap = (immap_t *) IMAP_ADDR;
+ unsigned *bcsr_io;
+
+ bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
+
+ if (bcsr_io == NULL) {
+ printk(KERN_CRIT "Could not remap BCSR\n");
+ return;
+ }
+
+ /* Enable the PHY.
+ */
+ setbits32(bcsr_io+4, BCSR4_ETH10_RST);
+ /* Configure port A pins for Txd and Rxd.
+ */
+ setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
+ clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
+ clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
+ setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+
+ /* Configure port E for TCLK and RCLK.
+ */
+ setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
+ clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
+ clrbits32(&immap->im_cpm.cp_pedir,
+ PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
+ clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
+ setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
+
+ /* Configure Serial Interface clock routing.
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+ clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
+ setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
+
+ /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
+ */
+ immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex
mode
+ * by H/W setting after reset. SCC ethernet controller support only
half duplex.
+ * This discrepancy of modes causes a lot of carrier lost errors.
+ */
+
+ /* In the original SCC enet driver the following code is placed at
+ the end of the initialization */
+ setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
+ clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
+ setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
+
+ setbits32(bcsr_io+1, BCSR1_ETHEN);
+ iounmap(bcsr_io);
+}
+
+static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
+{
+ struct fs_platform_info *fpi = pdev->dev.platform_data;
+
+ volatile cpm8xx_t *cp;
+ bd_t *bd = (bd_t *) __res;
+ char *e;
+ int i;
+
+ /* Get pointer to Communication Processor */
+ cp = cpmp;
+ switch (fs_no) {
+ case fsid_fec1:
+ fpi = &mpc8xx_fec_pdata[0];
+ fpi->init_ioports = &setup_fec1_ioports;
+ break;
+ case fsid_fec2:
+ fpi = &mpc8xx_fec_pdata[1];
+ fpi->init_ioports = &setup_fec2_ioports;
+ break;
+ case fsid_scc3:
+ fpi = &mpc8xx_scc_pdata;
+ fpi->init_ioports = &setup_scc3_ioports;
+ mpc885ads_scc_phy_init(fpi->phy_addr);
+ break;
+ default:
+ break;
+ }
+
+ pdev->dev.platform_data = fpi;
+ fpi->fs_no = fs_no;
+
+ e = (unsigned char *)&bd->bi_enetaddr;
+ for (i = 0; i < 6; i++)
+ fpi->macaddr[i] = *e++;
+
+ fpi->macaddr[5 - pdev->id]++;
+
+}
+
+static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
+ int idx)
+{
+ /* This is for FEC devices only */
+ if (!strstr(pdev->name, "fsl-cpm-fec"))
+ return;
+ mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
+}
+
+static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
+ int idx)
+{
+ /* This is for SCC devices only */
+ if (!strstr(pdev->name, "fsl-cpm-scc"))
+ return;
+
+ mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
+}
+
+/* SCC ethernet controller does not have MII management channel. FEC1 MII
+ * channel is used to communicate with the 10Mbit PHY.
+ */
+
+#define MII_ECNTRL_PINMUX 0x4
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_RCNTRL_MII_MODE 0x00000004
+
+/* Make MII read/write commands.
+ */
+#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) <<
18) | \
+ ((VAL) & 0xffff) | ((PHY_ADDR) << 23))
+
+static void mpc885ads_scc_phy_init(char phy_addr)
+{
+ volatile immap_t *immap;
+ volatile fec_t *fecp;
+ bd_t *bd;
+
+ bd = (bd_t *) __res;
+ immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */
+ fecp = &(immap->im_cpm.cp_fec);
+
+ /* Enable MII pins of the FEC1
+ */
+ setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
+ clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
+ /* Set MII speed to 2.5 MHz
+ */
+ out_be32(&fecp->fec_mii_speed,
+ ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1);
+
+ /* Enable FEC pin MUX
+ */
+ setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
+ setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
+
+ out_be32(&fecp->fec_mii_data,
+ mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr));
+ udelay(100);
+ out_be32(&fecp->fec_mii_data,
+ mk_mii_write(MII_ADVERTISE,
+ ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr));
+ udelay(100);
+
+ /* Disable FEC MII settings
+ */
+ clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
+ clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
+ out_be32(&fecp->fec_mii_speed, 0);
+}
+
+static int mpc885ads_platform_notify(struct device *dev)
+{
+ static struct {
+ const char *bus_id;
+ void (*rtn) (struct platform_device * pdev, int idx);
+ } dev_map[] = {
+ {
+ "fsl-cpm-fec", mpc885ads_fixup_fec_enet_pdata}, {
+ "fsl-cpm-scc", mpc885ads_fixup_scc_enet_pdata},};
+ struct platform_device *pdev;
+ int i, j, idx;
+ const char *s;
+ if (dev && dev->bus_id)
+ for (i = 0; i < ARRAY_SIZE(dev_map); i++) {
+ idx = -1;
+
+ if ((s = strrchr(dev->bus_id, '.')) != NULL)
+ idx = (int)simple_strtol(s + 1, NULL, 10);
+ else
+ s = dev->bus_id;
+ j = s - dev->bus_id;
+ if (!strncmp(dev->bus_id, dev_map[i].bus_id, j)) {
+ pdev =
+ container_of(dev, struct platform_device,
+ dev);
+ dev_map[i].rtn(pdev, idx);
+ }
+ }
+ return 0;
+}
+
+int __init mpc885ads_init(void)
+{
+ printk(KERN_NOTICE "mpc885ads: Init\n");
+
+ platform_notify = mpc885ads_platform_notify;
+
+ identify_ppc_sys_by_name(BOARD_CHIP_NAME);
+
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
+ ppc_sys_device_remove(MPC8xx_CPM_FEC2);
+#endif
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ ppc_sys_device_remove(MPC8xx_CPM_SCC3);
+#endif
+
+ ppc_sys_device_remove(MPC8xx_CPM_SCC1);
+ ppc_sys_device_remove(MPC8xx_CPM_SCC2);
+ ppc_sys_device_remove(MPC8xx_CPM_SCC4);
+ ppc_sys_device_remove(MPC8xx_CPM_SMC1);
+ ppc_sys_device_remove(MPC8xx_CPM_SMC2);
+
+ return 0;
+}
+
+arch_initcall(mpc885ads_init);
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 2bfdf9c..0ff4395 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -556,4 +556,11 @@ extern void pci_iounmap(struct pci_dev *
*/
#define xlate_dev_kmem_ptr(p) p
+/* access ports */
+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
+#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
+
#endif /* __KERNEL__ */
---
Sincerely,
Vitaly
