Lots of thanks for the reply. If you do not bother to aswer me again, do you know which devices are supported by Mobilinux? I cannot find that information in the web, and if one of them is Virtex II-Pro, it would be a good new for us.
Thanks again! Paula Paulinha wrote: > Hi all, > > I am starting a new design for a mobile device, with a virtex 4, and > based on the ppc405 hard core it has inside. > > Because of power issues, we are thinking about a OS which implies low > disipation, and we have heared about mobilinux (Montavista distribution, > I think). Yes, mobilinux is a MontaVista product (it used to be called Consumer Electronics Edition some time ago). So far I haven't heard about plans to support Virtex 4 in Mobilinux. Please contact MVista in an official way - I was mostly developing for the Professional Edition (the most generic distribution with minimal set of additional features) and may not have the whole picture. Probably Virtex 4 support in Mobilinux could be done as a Professional Services project. Pro Edition LSP for Virtex 4 based Xilinx ML403 board should be available in Q1 2006. But power consumption is not in the requirements for this LSP. Best regards, Andrei > I would like to hear some oppinions or different possibilities. > > Thanks and have a nice day! > Paula > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051123/e3d6e69c/attachment.htm
