zengshuai at sogou.com wrote: > first,i'm sorry my poor English. > Our team is a new team.we want to design a production,which used to > receive/transmit aal2 and aal5. > So we choose the MPC8280 and PQ2FADS_ZU(a kind of MPC8280 Boards). Now we can > run linux on this board. > But there are so less example code about ATM,and they don't support linux,but > bare-board. > We are all student.We don't know how to go on our design.Use linux or not,use > Codewarrior Development > Studio PowerPC ISA Edition for Comm Processors or Linux Application/Platform > Edition,can get some code > we needed or not,and so on. > Our freescale agent just sale us a PQ2FADS_ZU board,and say they didn't know > any more. > We need some help and some advise.What are you usually to do next to go on > your design? thanks a lot. > There is a sf project - http://mpc8260sar.sourceforge.net/. I don't know if PQ2FADS is supported, but it supports 8272ADS which is really similar.
For start, take a look at http://www.denx.de/wiki/DULG/Manual. > ------------------------------ > ?????Sogou.com?2G??????????! > http://mail.sogou.com/recommend/sogoumail_invite_reg1.jsp?from=sogouinvitation&s_EMAIL=zengshuai%40sogou.com&username=linuxppc-embedded&FullName=linuxppc-embedded&Email=linuxppc-embedded%40ozlabs.org&verify=755eff4e640bdcfc57d93cbd8b0a9cb7 > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > ??? -- Sincerely, Vitaly
