On Sun, 2003-12-28 at 21:05, Kamaraj P wrote: > Hi All, > I am using RedBoot in IXP425 Board (Embedded Linux). > Whether this environment settings are specific to U-Boot ?? If I am using > RedBoot, How can I debug the kernel Image. > Is there any FAQ available. >
Perhaps you should be asking these questions on an ARM Linux list. This list, and its members, concentrate mostly on PowerPC based systems and the software that support them. > > Thanks in Advance. > Kamaraj. > > -----Original Message----- > From: owner-linuxppc-embedded at lists.linuxppc.org > [mailto:owner-linuxppc-embedded at lists.linuxppc.org]On Behalf Of Wolfgang > Denk > Sent: Friday, December 26, 2003 3:56 PM > To: sun-zj > Cc: linuxppc-embedded at lists.linuxppc.org > Subject: Re: kernel can't boot > > > > In message <200312260052.SAA27783 at lists.linuxppc.org> you wrote: > > > > I am using the ELDL-2.1 from denx(Thanks their hard works) > > and the recent kernel advised by Denk(thanks a lots). I compile > > it and download it by tftp with FEC ethernet. > > I use the FADS board and U-boot-1.0.0. The eldk enclosed > > kernel-2.4.4 works fine. But kernel-2.4.23 can go to the stage > > of Uncompressed kernel image OK. and then system Hangs there > > without any messages? > > Probably the kernel received invalid parameters (clock information). > > > Who can tell me what happens ? > > You did not read the FAQ. See > http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKernel > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de > Ernest asks Frank how long he has been working for the company. > "Ever since they threatened to fire me." > > -- Gary Thomas <gary at mlbassoc.com> MLB Associates ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
