Liu HongXun-a16975 wrote: > > When I inserted ds.o, the driver tells me that "cs: socket 0 timed out during > reset" > I looked through the source code and the debug info. > I found that a lot of the same messages as follows: > GetStatus(0) = 0x190 > ... > Such info come from m8xx_pcmcia.c/m8xx_get_status. It seems that someone > is not satisfied with the above return value and " get status " again and > again. > Then it quit.
To look at it a different way - the driver was unhappy with the value of the first inb() on an address in the card's I/O space. My first guess (been there myself) is that inb() and outb() aren't working to your card's I/O space. -- ..................................................................... Peter Desnoyers (781) 457-1165 pdesnoyers at chinook.com Chinook Communications (617) 661-1979 pjd at fred.cambridge.ma.us 100 Hayden Ave, Lexington MA 02421 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
