In message <001f01c59417$fe81b840$f201a8c0 at SN7606> you wrote: > > i?m using on my custom board a ATI M6 Mobility Radeon with kernel 2.6.12. > Now i have to initialize the ati and configure the kernel to support it. Did > someone use this combination (ppc + ati radeon)? It would be appreciating to > get some help or tipps in configuring to get the ati functioning. Especially > the BIOS of the ATI chip, because i have actually found only x86 binaries. > Is it also possible to set up the bios settings for the ati chip without an > bios eeprom attached via the radeon driver?
If you use U-Boot as boot loader you can enable and use the x86 emulator taht comes included with it. But don't expect to much help with that - except for the Amiga One (where I was told this is working) I don't know of any other board using this feature. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Two wrongs don't make a right, but three rights make a left.