In message <1FF3FFE3-609F-11D8-A367-000393A47A5C at lanl.gov> you wrote: > > The sandpoint has at least two (sometimes three) flash parts. The one > containing DINK is on the PCI bus on the motherboard. One or two other > flash parts are on the PrMC card connected to the local memory bus. It > is normal to leave DINK alone and program one of the other flash parts > with an alternate boot loader. There are a series of dip switches that > switch between programming and booting from the various flash parts. > Unfortunately the documentation for the switch positions is very > confusing and unless you get it exactly right the board will not boot.
U-Boot comes with a file doc/README.Sandpoint8240 which explains all the required details. Best regards, Wolfgang Denk -- See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Beware of the Turing Tar-pit in which everything is possible but nothing of interest is easy. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/