edit GLIBC_INSTALL_PATH/libc.so as the following: /* GNU ld script Use the shared library, but some functions are only in the static library, so try that secondarily. */ GROUP ( /lib/libc.so.6 /lib/libc_nonshared.a )
----- Original Message ----- From: "Keith Outwater" <[EMAIL PROTECTED]> To: <linuxppc-embedded at lists.linuxppc.org> Sent: Wednesday, November 14, 2001 10:06 PM Subject: Problems building ppc cross compiler under RH7.2 x86 > > Greetings all - > I'm trying to build a powerpc-linux cross compiler on a stock Redhat 7.2 x86 > system. > > I've followed all of the steps in the "Cross Development mini-howto for PPC > Linux " at > http://penguinppc.org/embedded/cross-compiling/ to the letter, but the build > fails on the > "Rebuilding gcc to use glibc" step in the mini-howto with the following > error: > > . > . > . > Configuring in powerpc-linux/libiberty > loading cache ./config.cache > checking host system type... powerpc-unknown-linux-gnu > checking build system type... i686-pc-linux-gnu > checking for powerpc-linux-ar... powerpc-linux-ar > checking for powerpc-linux-ranlib... powerpc-linux-ranlib > checking for gcc... > /home/keith/projects/mpc860-linux/tools/build-gcc/gcc/xgcc > -B/home/keith/projects/mpc860-linux/tools/build-gcc/gcc/ > -B/usr/local/powerpc-linux/bin/ > checking whether we are using GNU C... yes > checking whether /home/keith/projects/mpc860-linux/tools/build-gcc/gcc/xgcc > -B/home/keith/projects/mpc860-linux/tools/build-gcc/gcc/ > -B/usr/local/powerpc-linux/bin/ accepts -g... yes > checking for POSIXized ISC... no > checking for a BSD compatible install... /usr/bin/install -c > Appending ../../../gcc-2.95.2/libiberty/config/../../config/mh-ppcpic to > xhost-mkfrag > xhost-mkfrag is unchanged > checking how to run the C preprocessor... > /home/keith/projects/mpc860-linux/tools/build-gcc/gcc/xgcc > -B/home/keith/projects/mpc860-linux/tools/build-gcc/gcc/ > -B/usr/local/powerpc-linux/bin/ -E > checking for sys/file.h... yes > checking for sys/param.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for unistd.h... yes > checking for strings.h... yes > checking for sys/time.h... yes > checking for sys/resource.h... yes > checking for sys/wait.h that is POSIX.1 compatible... yes > checking whether the C compiler > (/home/keith/projects/mpc860-linux/tools/build-gcc/gcc/xgcc > -B/home/keith/projects/mpc860-linux/tools/build-gcc/gcc/ > -B/usr/local/powerpc-linux/bin/ -g -O2 ) works... no > configure: error: installation or configuration problem: C compiler cannot > create executables. > make[1]: Entering directory > `/home/keith/projects/mpc860-linux/tools/build-gcc/powerpc-linux/libio' > test x"yes" != xyes || \ > /home/keith/projects/mpc860-linux/tools/build-gcc/gcc/xgcc > -B/home/keith/projects/mpc860-linux/tools/build-gcc/gcc/ > -B/usr/local/powerpc-linux/bin/ -c -g -O2 -fvtable-thunks -D_GNU_SOURCE > -fno-implicit-templates -I. -I../../../gcc-2.95.2/libio -nostdinc++ > -D_IO_MTSAFE_IO -fPIC ../../../gcc-2.95.2/libio/indstream.cc -o > pic/indstream.o > ../../../gcc-2.95.2/libio/indstream.cc: In method `struct streampos > indirectbuf::seekoff(long long int, ios::seek_dir, int = 3)': > ../../../gcc-2.95.2/libio/indstream.cc:82: `struct streampos' used where a > `int' was expected > ../../../gcc-2.95.2/libio/indstream.cc:85: `struct streampos' used where a > `int' was expected > ../../../gcc-2.95.2/libio/indstream.cc:87: `struct streampos' used where a > `int' was expected > ../../../gcc-2.95.2/libio/indstream.cc:89: conversion from `int' to > non-scalar type `streampos' requested > ../../../gcc-2.95.2/libio/indstream.cc: In method `struct streampos > indirectbuf::seekpos(_G_fpos64_t, int = 3)': > ../../../gcc-2.95.2/libio/indstream.cc:99: `struct streampos' used where a > `int' was expected > ../../../gcc-2.95.2/libio/indstream.cc:102: `struct streampos' used where a > `int' was expected > ../../../gcc-2.95.2/libio/indstream.cc:104: `struct streampos' used where a > `int' was expected > ../../../gcc-2.95.2/libio/indstream.cc:106: conversion from `int' to > non-scalar type `streampos' requested > make[1]: *** [indstream.o] Error 1 > make[1]: Leaving directory > `/home/keith/projects/mpc860-linux/tools/build-gcc/powerpc-linux/libio' > make: *** [all-target-libio] Error 2 > > > I'd appreciate any help or suggestions on how to solve this problem. > > Thanks! > Keith > > Keith Outwater > Sr. Electrical Engineer > Microvision, Inc. > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
