Dear Sebastien, in message <3BFBE9F2.2090800 at oerlikon.ca> you wrote: > > >What happens when you enable the MDIO option? > > It says: > ... > fec: No PHY device found.
Well, this seems to be a hint... > Yes, the LXT971 code is enabled in fec.c. > I find out that the older CLLF_BW board was using a QS6612 PHY, but the > CLLF_BW31 (my board revision) is using an LXT971. Check if your hardware requires to enable and/or reset the PHY using some port pins or bits in a board control register... Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de A fail-safe circuit will destroy others. -- Klipstein ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
