Try upgrading to the latest pcmcia-cs which is 3.1.24. There have been several changes.
Are you sure your card is 16 bit? Typically the 100Mbit cards are CardBus(32bit). David Hopcroft wrote: > > Hi, > > I wonder if any one can shed some light on a problem I am having? I am trying > to implement PCMCIA services on a custom PPC based board. > > I am using; > Processor - PPC 823 @ 64MHz > Kernel - 2.2.14 > Card Services - 3.1.10 > PCMCIA card - Xircom CreditCard Ethernet (CE3B-100BTX) > > I "insmod" the required modules (pcmcia_core, m8xx_pcmcia, ds and xirc2ps_cs) > and run cardmgr. > > The problem arises when I insert a pcmcia card, into it's slot. At which > point I get a "Kernel panic: machine check". This seems to be around the > area, > in the code, where the card services are starting to read it's CIS/attribute > area. > > I have iormap'd _IO_BASE to 0x80000000 in init.c > > My BMT is enabled but set to 255(Max value). > > The bus frequency of the board is 32Mhz I have tried setting this in the code > to values of 32 & 32000000 with the same results. looking at file > m8xx_pcmcia.c > it should be set to the latter. > > Can any one suggest any thing obvious I have missed, or misunderstood? > > I can post a debug log if required, but it's quite long. > > --- > David Hopcroft > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
