Hi, all I am not used to write in English. I would like to use SCC3 as second console, and use SMC1 as first console. I ported denx kernel 2.4.3-pre4 into my 860 board. when I compiling, checked SCC3 for UART option in MPC8xx CPM option. SMC1(ttyS0) is connected to my linux box COM2, SCC3(ttyS1) is connected to COM1.
After booting, in COM2 echo 1111 > /dev/ttyS1 result is shown in SCC3(ttyS1). so far good. but, COM1 port don't any receive keyboard key. In /arch/ppc/uart.c I modified CONFIG_SERIAL_CONSOLE_PORT for SCC3 console #if 1 #undef CONFIG_SERIAL_CONSOLE_PORT #define CONFIG_SERIAL_CONSOLE_PORT 1 #endif Is it enough to to make SCC3 console? Thanks for any comments and replyings. ================================================== ?? ???, Daum ?? ?? ?? E-mail ?? ???? ??? ?? ????? Daum FIREBALL http://www.daum.net ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
