On Fri, May 26, 2000 at 12:02:37PM -0400, Dan Malek wrote: > > Can anyone who's using this board please shed some light > > on what's going on? > > It depends upon the type of DIMM you are using. Mine has the 2M x 64 > DIMM, so it uses only /CS2 to get the 16 Mbyte space. It also depends > upon the DRAM controller configuration. Make sure you have the DRAM > controller properly configured to route the address lines.
The vxWorks BSP expects a stick with one bank of 16MB SDRAM. If you didn't get such a stick from EST, I'd go back and complain. Alternatively, you could put a stick in that has a bank that is at least 16MB. I have a 128MB stick in mine and it happily pretends to be 16MB. Neil. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
