Hi , all First I according Clemens Koller' suggestion : remove DMA part , but the result is no change. According Clemens Koller's message , I guess mabe the problem is on the hardware configuration. So I checked my schematics and "arch/ppc/platforms/85xx/mpc85xx_ads_common.c" at line 170 . The attached file is changed . After these , "Lost interrupt" appears on PCI1-Slot1 , but my PCI1-Slot2 shows no "Lost interrupt" the .config file is still without change . Another new problem is I can't mount it on , I attached the steps message of new operation. Please help me check it .
Thanks a lot ! Rune Torgersen wrote : >I have run a Silicon Image SiI0680 based card on a MPC8560ADS board without problems Clemens Koller wrote: >Try to turn off DMA. It doesn't work yet AFAIK. >I am using a PDC20269 on PCI on a MPC8540, too. See my .config file... >I didn't focus on this problem yet. Let me know if you get it going. >My board PM854 is similar to the MPC8540_ADS -------------- next part -------------- A non-text attachment was scrubbed... Name: mpc8540.zip Type: application/octet-stream Size: 9511 bytes Desc: not available Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050913/eedbbe9e/attachment.obj