In message <A9DE2BAF233E444FA9C5E77A5825A01E8652FD at ydmail.sbell.com.cn> you wrote: > > I use ppcboot and ELDK 3.1.1 kernel 2.4.25 to boot a PPC860 board, I > select the ttyS0, 9600, root=/de/ram during config the kernel. > I select the SMC1,SMC2 device too. > But when bootm 180000, it print the "Transferring control to Linux (at > address 00000000)" then halt. > How can I do? Tell me the detail when config the kernel, thanks!
After all the questions you posted to the mailing list I want to give two recommendations: * Please continue to try things for a while (dasy a day or so) before posting. This will avoid a lot of unnecessary postings. * Please do yourself (and us) a favour and read the documentation, especially the FAQ section of the DULG. If you already read it, then read it agaion, carefully. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de You may call me by my name, Wirth, or by my value, Worth. - Nicklaus Wirth