Hi Peter - Yes, I have looked at both xapp765 and xapp542. In order to get the kernel source mentioned in the app note, I have to get the Monta Vista preview kit and get it installed. The preview kit will not install under Fedora Core 4 - the encryption stuff is broken (and the fix in the Monta Vista FAQ does not work). I am running all of my development tools (EDK, ISE, ELDK, etc...) under Fedora Core 4, so I am looking for a publicly accessible kernel source tree that best supports the PPC405 in the Virtex II Pro.
Keith Peter Ryser <peter.ryser at xilinx.com> wrote on 08/15/2005 09:15:42 PM: > You might want to look at Xilinx Application Note 765 (XAPP765, > http://www.xilinx.com/bvdocs/appnotes/xapp765.pdf) for some instructions > on how to get started with EDK and Linux. All source is published in > linuxppc-2.4. > > - Peter > > > Keith J Outwater wrote: > > >Hello all - > >I am designing an embedded system using a Xilinx Virtex II Pro FPGA. > >Can anyone point me to the "best" kernel source tree to use ? > >"Best" in this case means: > >1. A 2.4 series kernel with good support for Xilinx peripheral devices > >(existing Xilinx ML300 support is fine). > >2. Good stability > > > >By default I'll use the Montavista linuxppc_2.4 tree unless there is a > >better choice out there. > > > >Thanks! > > > >Keith > >_______________________________________________ > >Linuxppc-embedded mailing list > >Linuxppc-embedded at ozlabs.org > >https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > > > > > > > > >