In message <20050825032128.D90A368110 at ozlabs.org> you wrote: > > My flash is 16M that is mapping on 0xFF000000-0xFFFFFFFF. > mtd0: 0xFF000000-0xFF1FFFFF Kernel > mtd1: 0xFF200000-0xFF9FFFFF RootFS > mtd2: 0xFFA00000-0xFFAFFFFF Config > mtd3: 0xFFF00000-0xFFFFFFFF U-Boot > > Now I can build an image for mtd device, for example, dd if=/dev/mtd0 > of=kernel.img.
If you want to copy the image to flash, you got the parameters wrong, i. e. you must use dd if=kernel.img of=/dev/mtd0 (after erasing /dev/mtd0, of course); and using some bs= option may speed up the prcedure a bit, too. > But I don't know how to build a image for whole flash ? What do you mean "for the whole flash"? If you cant to combine the 4 images into one big blob you can do so by (1) padding the images to the full size of each partition; this can be done using appropriate "bs=", "count=" and "conv=sync" parameters to dd; and (2) concatenating the images using "cat". But this is a prtty inefficient way, and you will also have to change your MTD partitioning to provide a big partition which covers the whole flash. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Some people march to the beat of a different drummer. And some people tango!