Well there are a lot of things that could be wrong. I'd have to actually see your code to figure out what's wrong. Use arch/ppc/platforms/ev64260.c as an example, if you haven't already. Sorry I can't help more but there are simply too many possibilities and not enough info to narrow down the possibilities to suggest anything.
Mark -- ?????? wrote: >Dear all. > >I have a board that consisted of mpc7410+gt64260+pci_device, >and I have already success to read/write the pci_device. >After init the pci_device, I command to the pci_device >that read data from main memory(sdram), >but, the pci_device does not operate and return only fail... > >I think that this is the DMA Problem... >so I want to know that how to set the register of gt64260 to do >DMA operation. > >I already set PCI SCS[0] Size Reg, PCI SCS[0] Base Addr Remap Reg, >and PCI Base Address Enable Reg. what I omitted? or ... > >please help me... > >Thanks everybody. > > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/