I assume the patches you are using are for the problems described in http://lists.linuxppc.org/listarcs/linuxppc-embedded/199912/msg00018.html
If not, you might read that one.. Lucinda Schafer Staff Software Engineer Adaptive Micro-Ware, Inc. -----Original Message----- From: Michael Coy [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 20, 2000 8:29 AM To: linuxppc-embedded at lists.linuxppc.org Subject: PCMCIA ATA flash support? I'm trying to get PCMCIA support working on Montavista's Hardhat linux and an RPX lite (MPC 823). The PC card I'm using is a SanDisk ATA flashdisk, if that makes a difference. I've got the patches from absoval.com and followed all the instructions in their doc. I also have read the PCMCIA howto. I can insmod the pcmcia drivers, and a cardctl ident does identify the card to be a SunDisk fixed disk. But as soon as I start cardmgr to attach the IDE device, I get: kernel panic: Kernel Mode Software FPU Emulation I've tried compiling the kernel both with and without FPU emulation, and I've also tried changing the memory addresses, as suggested by the PCMCIA howto. I even tried replacing the card. Nothing seems to make a difference. Any suggestions would be greatly appreciated. Thanks, mike ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
