This version of the patch fixes a few compilation problems in the last
version when CONFIG_NOT_COHERENT_CACHE was not set. I'm running it
now on my TiBook, and it works nicely on the 405GP machine.
iff -urN /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/config.in
linux-grinch-largepage/arch/ppc/config.in
--- /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/config.in Fri Jun 14
09:47:07 2002
+++ linux-grinch-largepage/arch/ppc/config.in Fri Jun 14 10:09:53 2002
@@ -357,9 +357,6 @@
if [ "$CONFIG_8xx" = "y" ]; then
bool "Pinned Kernel TLBs (860 ONLY)" CONFIG_PIN_TLB
fi
- if [ "$CONFIG_40x" = "y" ]; then
- bool "Pinned Kernel TLBs" CONFIG_PIN_TLB
- fi
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
diff -urN /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/kernel/head_4xx.S
linux-grinch-largepage/arch/ppc/kernel/head_4xx.S
--- /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/kernel/head_4xx.S Wed Jun
12 15:46:14 2002
+++ linux-grinch-largepage/arch/ppc/kernel/head_4xx.S Wed Jun 12 15:46:33 2002
@@ -262,10 +262,10 @@
tophys(r21, r21)
rlwimi r21, r20, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
lwz r21, 0(r21) /* Get L1 entry */
- rlwinm. r22, r21, 0, 0, 19 /* Extract L2 (pte) base address */
+ andi. r22, r21, _PMD_PRESENT /* Check if it points to a PTE page */
beq 2f /* Bail if no table */
- tophys(r22, r22)
+ tophys(r22, r21)
rlwimi r22, r20, 22, 20, 29 /* Compute PTE address */
lwz r21, 0(r22) /* Get Linux PTE */
@@ -497,33 +497,40 @@
tophys(r21, r21)
rlwimi r21, r20, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
lwz r21, 0(r21) /* Get L1 entry */
- rlwinm. r22, r21, 0, 0, 19 /* Extract L2 (pte) base address */
+ andi. r22, r21, _PMD_PRESENT /* check if it points to pte page */
beq 2f /* Bail if no table */
- tophys(r22, r22)
+ tophys(r22, r21)
rlwimi r22, r20, 22, 20, 29 /* Compute PTE address */
lwz r21, 0(r22) /* Get Linux PTE */
andi. r23, r21, _PAGE_PRESENT
- beq 2f
+ beq 5f
ori r21, r21, _PAGE_ACCESSED
stw r21, 0(r22)
- /* Most of the Linux PTE is ready to load into the TLB LO.
- * We set ZSEL, where only the LS-bit determines user access.
- * We set execute, because we don't have the granularity to
- * properly set this at the page level (Linux problem).
- * If shared is set, we cause a zero PID->TID load.
- * Many of these bits are software only. Bits we don't set
- * here we (properly should) assume have the appropriate value.
+ /* Create TLB tag. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0.
*/
- li r22, 0x0ce2
- andc r21, r21, r22 /* Make sure 20, 21 are zero */
+ li r22, 0x00c0
+ rlwimi r20, r22, 0, 20, 31
b finish_tlb_load
-
+ /* Check for possible large-page pmd entry */
2:
+ rlwinm. r22,r21,2,22,24 /* size != 0 means large-page */
+ beq 5f
+
+ /* Create EPN. This is the faulting address plus a static
+ * set of bits (valid, E, U0) plus the size from the PMD.
+ */
+ ori r22,r22,0x40
+ rlwimi r20, r22, 0, 20, 31
+
+ b finish_tlb_load
+
+5:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
@@ -590,32 +597,40 @@
tophys(r21, r21)
rlwimi r21, r20, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
lwz r21, 0(r21) /* Get L1 entry */
- rlwinm. r22, r21, 0, 0, 19 /* Extract L2 (pte) base address */
+ andi. r22, r21, _PMD_PRESENT /* check if it points to pte page */
beq 2f /* Bail if no table */
- tophys(r22, r22)
+ tophys(r22, r21)
rlwimi r22, r20, 22, 20, 29 /* Compute PTE address */
lwz r21, 0(r22) /* Get Linux PTE */
andi. r23, r21, _PAGE_PRESENT
- beq 2f
+ beq 5f
ori r21, r21, _PAGE_ACCESSED
stw r21, 0(r22)
- /* Most of the Linux PTE is ready to load into the TLB LO.
- * We set ZSEL, where only the LS-bit determines user access.
- * We set execute, because we don't have the granularity to
- * properly set this at the page level (Linux problem).
- * If shared is set, we cause a zero PID->TID load.
- * Many of these bits are software only. Bits we don't set
- * here we (properly should) assume have the appropriate value.
+ /* Create EPN. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0.
*/
- li r22, 0x0ce2
- andc r21, r21, r22 /* Make sure 20, 21 are zero */
+ li r22, 0x00c0
+ rlwimi r20, r22, 0, 20, 31
b finish_tlb_load
+ /* Check for possible large-page pmd entry */
2:
+ rlwinm. r22,r21,2,22,24 /* size != 0 means large-page */
+ beq 5f
+
+ /* Create EPN. This is the faulting address plus a static
+ * set of bits (valid=1, E=0, U0=0) plus the size from the PMD.
+ */
+ ori r22,r22,0x40
+ rlwimi r20, r22, 0, 20, 31
+
+ b finish_tlb_load
+
+5:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
@@ -750,25 +765,20 @@
*/
lwz r23, tlb_4xx_index at l(0)
addi r23, r23, 1
-#ifdef CONFIG_PIN_TLB
- cmpwi 0, r23, 61 /* reserve entries 62, 63 for kernel */
- ble 7f
- li r23, 0
-7:
-#else
andi. r23, r23, (PPC4XX_TLB_SIZE-1)
-#endif
stw r23, tlb_4xx_index at l(0)
6:
+ /*
+ * Clear out the software-only bits in the PTE to generate the
+ * TLB_DATA value. These are the bottom 2 bits of RPN, the
+ * top 3 bits of the zone field, and M.
+ */
+ li r22, 0x0ce2
+ andc r21, r21, r22 /* Make sure 20, 21 are zero */
+
tlbwe r21, r23, TLB_DATA /* Load TLB LO */
- /* Create EPN. This is the faulting address plus a static
- * set of bits. These are size, valid, E, U0, and ensure
- * bits 20 and 21 are zero.
- */
- li r22, 0x00c0
- rlwimi r20, r22, 0, 20, 31
tlbwe r20, r23, TLB_TAG /* Load TLB HI */
/* Done...restore registers and get out of here.
@@ -954,10 +964,8 @@
/* Load up the kernel context */
2:
SYNC /* Force all PTE updates to finish */
-#ifndef CONFIG_PIN_TLB
tlbia /* Clear all TLB entries */
sync /* wait for tlbia/tlbie to finish */
-#endif
/* set up the PTE pointers for the Abatron bdiGDB.
*/
diff -urN /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/kernel/misc.S
linux-grinch-largepage/arch/ppc/kernel/misc.S
--- /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/kernel/misc.S Fri May
24 12:16:25 2002
+++ linux-grinch-largepage/arch/ppc/kernel/misc.S Tue Jun 11 17:08:35 2002
@@ -354,18 +354,8 @@
* Flush MMU TLB
*/
_GLOBAL(_tlbia)
-#if defined(CONFIG_40x) && defined(CONFIG_PIN_TLB)
- /* This needs to be coordinated with other pinning functions since
- * we don't keep a memory location of number of entries to reduce
- * cache pollution during these operations.
- */
- lis r3, 0
- sync
-1:
- tlbwe r3, r3, TLB_TAG /* just ensure V is clear */
- addi r3, r3, 1 /* so r3 works fine for that */
- cmpwi 0, r3, 61 /* reserve last two entries */
- ble 1b
+#if defined(CONFIG_40x)
+ tlbia
isync
#elif defined(CONFIG_440)
lis r3,0
@@ -376,7 +366,7 @@
cmpwi 0,r3,61
ble 1b
isync
-#else
+#else /* !defined(CONFIG_40x) && !defined(CONFIG_440) */
#if defined(CONFIG_SMP)
mfmsr r10
SYNC
@@ -410,7 +400,7 @@
#else /* CONFIG_SMP */
sync
#endif /* CONFIG_SMP */
-#endif /* defined(CONFIG_40x) && defined(CONFIG_PIN_TLB) */
+#endif /* ! defined(CONFIG_40x) && ! defined(CONFIG_440) */
blr
/*
diff -urN /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/mm/4xx_mmu.c
linux-grinch-largepage/arch/ppc/mm/4xx_mmu.c
--- /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/mm/4xx_mmu.c Thu May
30 18:15:28 2002
+++ linux-grinch-largepage/arch/ppc/mm/4xx_mmu.c Tue Jun 11 17:21:06 2002
@@ -53,6 +53,7 @@
#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/setup.h>
+#include "mmu_decl.h"
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
@@ -90,4 +91,50 @@
mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */
mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */
+}
+
+#define LARGE_PAGE_SIZE_16M (1<<24)
+#define LARGE_PAGE_SIZE_4M (1<<22)
+
+unsigned long __init largepte_mapin_ram(void)
+{
+ unsigned long v, s;
+ phys_addr_t p;
+
+ v = KERNELBASE;
+ p = PPC_MEMSTART;
+ s = 0;
+
+ while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC |
_PAGE_HWWRITE;
+
+ spin_lock(&init_mm.page_table_lock);
+ pmdp = pmd_offset(pgd_offset_k(v), v);
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ spin_unlock(&init_mm.page_table_lock);
+
+ v += LARGE_PAGE_SIZE_16M;
+ p += LARGE_PAGE_SIZE_16M;
+ s += LARGE_PAGE_SIZE_16M;
+ }
+
+ while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC |
_PAGE_HWWRITE;
+
+ spin_lock(&init_mm.page_table_lock);
+ pmdp = pmd_offset(pgd_offset_k(v), v);
+ pmd_val(*pmdp) = val;
+ spin_unlock(&init_mm.page_table_lock);
+
+ v += LARGE_PAGE_SIZE_4M;
+ p += LARGE_PAGE_SIZE_4M;
+ s += LARGE_PAGE_SIZE_4M;
+ }
+
+ return s;
}
diff -urN /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/mm/pgtable.c
linux-grinch-largepage/arch/ppc/mm/pgtable.c
--- /home/dgibson/kernel/linuxppc_2_4_devel/arch/ppc/mm/pgtable.c Mon Apr
8 10:29:07 2002
+++ linux-grinch-largepage/arch/ppc/mm/pgtable.c Thu Jun 13 17:53:49 2002
@@ -75,6 +75,12 @@
#define p_mapped_by_bats(x) (0UL)
#endif /* HAVE_BATS */
+#if (_PMD_SIZE == 0) /* No large page PMD support */
+#define largepte_mapin_ram() 0UL
+#else
+extern unsigned long largepte_mapin_ram(void);
+#endif
+
#ifndef CONFIG_PPC_ISERIES
#ifndef CONFIG_440
void *
@@ -346,9 +352,12 @@
bat_mapin_ram(__bat2, __bat3);
#endif /* HAVE_BATS */
- v = KERNELBASE;
- p = PPC_MEMSTART;
- for (s = 0; s < total_lowmem; s += PAGE_SIZE) {
+ s = largepte_mapin_ram();
+
+ v = KERNELBASE + s;
+ p = PPC_MEMSTART + s;
+
+ for (; s < total_lowmem; s += PAGE_SIZE) {
/* On the MPC8xx, we want the page shared so we
* don't get ASID compares on kernel space.
*/
@@ -451,6 +460,8 @@
* tables.......I am actively working on resolving this, but
* can't hold up other stuff. -- Dan
*/
+ pgd_t *pgd;
+ pmd_t *pmd;
pte_t *pte;
struct mm_struct *mm;
@@ -468,10 +479,20 @@
mm = &init_mm;
pa = 0;
- if (get_pteptr(mm, addr, &pte))
- pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+ pgd = pgd_offset(mm, addr);
+ if (pgd) {
+ pmd = pmd_offset(pgd, addr);
+ if (pmd_present(*pmd)) {
+ pte = pte_offset(pmd, addr);
+ pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+ } else if (pmd_largepage(*pmd)) {
+ unsigned long mask = pmd_largepagemask(*pmd);
+
+ pa = (pmd_val(*pmd) & mask) | (addr & ~mask);
+ }
+ }
- return(pa);
+ return pa;
}
/* This is will find the virtual address for a physical one....
diff -urN /home/dgibson/kernel/linuxppc_2_4_devel/include/asm-ppc/pgtable.h
linux-grinch-largepage/include/asm-ppc/pgtable.h
--- /home/dgibson/kernel/linuxppc_2_4_devel/include/asm-ppc/pgtable.h Sat Jun
8 01:53:04 2002
+++ linux-grinch-largepage/include/asm-ppc/pgtable.h Fri Jun 14 14:56:57 2002
@@ -18,15 +18,7 @@
extern void _tlbia(void);
#ifdef CONFIG_4xx
-#ifdef CONFIG_PIN_TLB
-/* When pinning entries on the 4xx, we have to use a software function
- * to ensure we don't remove them since there isn't any hardware support
- * for this.
- */
-#define __tlbia() _tlbia()
-#else
#define __tlbia() asm volatile ("tlbia; sync" : : : "memory")
-#endif
static inline void local_flush_tlb_all(void)
{ __tlbia(); }
@@ -296,7 +288,12 @@
#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-#define _PMD_PRESENT PAGE_MASK
+
+#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
+#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M 0x0c0
+#define _PMD_SIZE_16M 0x0e0
+#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
#elif defined(CONFIG_440)
@@ -398,6 +395,10 @@
#ifndef _PAGE_EXEC
#define _PAGE_EXEC 0
#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE 0
+#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
+#endif
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
@@ -455,6 +456,10 @@
#define __S111 PAGE_SHARED_X
#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
@@ -469,9 +474,12 @@
#define pte_clear(ptep) do { set_pte((ptep), __pte(0)); } while
(0)
#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_bad(pmd) ((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define pmd_bad(pmd) ( ((pmd_val(pmd) & _PMD_PRESENT) == 0)
&& \
+ ((pmd_val(pmd) & _PMD_SIZE) == 0) )
#define pmd_present(pmd) ((pmd_val(pmd) & _PMD_PRESENT) != 0)
#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
+#define pmd_largepage(pmd) ((pmd_val(pmd) & _PMD_SIZE) != 0)
+#define pmd_largepagemask(pmd) (~(PMD_PAGE_SIZE(pmd_val(pmd)) - 1))
#define pte_page(x) (mem_map+(unsigned
long)((pte_val(x)-PPC_MEMSTART) >> PAGE_SHIFT))
--
David Gibson | For every complex problem there is a
david at gibson.dropbear.id.au | solution which is simple, neat and
| wrong. -- H.L. Mencken
http://www.ozlabs.org/people/dgibson
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
