Until a newer kernel is released by Monta Vista that includes a fix, you can use setpci to change the settings of the PCI bridge as follows:
setpci -s 0:0.1 14.L=0x8 Then you should be able to "insmod eepro100"... Regards, John On Mon, May 14, 2001 at 06:44:31PM +0800, machael thailer wrote: > > Now I have the same problem as you meet before. > Have you find a good solutions? > Thank you very mcuh. > > machael > > > > > Hi, > > > > I am trying to install Intel eepro100 onto WalnutPPC405GP. > > Basic PCI settings seem good but no frame is transmitted. > > The environment is WalnutPPC305GP with HardHatLinux 2.4.2 from > > MonraVista. > > > > I can read or write eepro configuration registers and other control > > registers via PCI memory space. > > But Bus Master operations do not seem functional. I am confirmed that > > MASTER operation bit in eepro100 is enabled. > > I think some more settings are needed for PPC405GP built-in PCI control > > registers and/or Walnut board jumpers/dipswitches. > > > > Has anyone tried PCI cards with BUS MASTER operations for Walnut > > PPC405GP? > > > > Thanks in advance, > > > > Hideo ------------------------------ John Cagle <jcagle at kernel.org> ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
