Dear all: Thanks for all the help. I've found out the problem. It's indeed a low-level problem. m8xx-pcmcia can't reconginize the io size of this kind of card. So i just manully set it to correct one. Then it works fine.
Thanks the authors. The two drivers are so great! regards ----- Original Message ----- From: "Magnus Damm" <[EMAIL PROTECTED]> To: "shaowei dai" <dshaowei at rfnetech.com> Sent: Saturday, August 03, 2002 1:42 AM Subject: Re: symbol card with orinoco_cs on mpc823 > Try disabling the busmonitor if it's enabled. > > / Magnus > > shaowei dai wrote: > > > > Hello, > > > > Has anybody tried orinodo_cs 0.11b or 0.12b with success on symbol > > Spectrum24 High rate11M card on mpc platform? > > I've tried 2.4.18-pre3 and 2.4.19-rc3 kernel with orinoco driver. It works > > fine with intersil card. But > > when i try it on symbol card, it always crashes. After tracing down i find > > it is caused by hermes_init(). It seems the > > call to hermes_write_regn(hw,INTEN,0) cause the crash. The ksymoops also > > suggest this function. It is just an io write. What can be wrong? And most > > strange thing is why it doesn't cause any trouble in normal intersil card. > > > > Any ideas is greatly appreciate! > > > > regards > > David > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
