hi i currently use the riscwatch to load ppcboot into ram and then run it from there to do so i changed the start of code segment in board/walnut405/config.mk to a address in ram eg. 30000. in include/config_WALNUT405.h i set th flash and monitor base to the same address (CFG_FLASH_BASE, CFG_MONITOR_BASE) load ppcboot with 'load file ppcboot', set iar to the start address, run
hope this helps p/s: please excuse the message format. Andreas Loeffler -- EL HD S/390 SPP (Support Processor Platform Development) IBM Entwicklungslabor Phone: +49 (0) 7031 16 5035 Schoenaicher Str. 220 Fax: +49 (0) 7031 16 4632 71032 Boeblingen URL: http://www.ibm.com byf <byfmail at yeah.net> 04/19/01 03:51 AM Please respond to byf To: "linuxppc-embedded at lists.linuxppc.org" <linuxppc-embedded at lists.linuxppc.org> cc: Subject: Can I use RiscWatch to load ppcboot? Hello, I am working for walnut 405GP, it has a ROM Monitor and RiscWatch. now I want to use PPCBoot to overwrite ROM Monitor, Can I use RiscWatch to load PPCBoot to flash or to ram and run it? or can I use a kernel with mtd support to finish this? I have no BDI2000. Thank you! byf byfmail at yeah.net ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
