> > When I insert a USB Mass storage device (thumb drive), I get the > > following errors > > > > / # usb 1-2: new high speed USB device using fsl-usb2-mph and > > address 8 > > usb 1-2: khubd timed out on ep0in > > usb 1-2: new high speed USB device using fsl-usb2-mph and address 9 > > usb 1-2: khubd timed out on ep0in > > > > It does not show up in /proc/bus/usb/devices (I do have usbfs > > mounted). > > > > I also have usb-utils installed and lsusb fails to list the device. > > > > I have also tried other USB devices and get similar errors. > > > > Has anybody else experience similar problems? Any pointers/help > > will be > > appreciated. > > I know there are some bugs in the Freescale driver that was released > as part of their BSP. > > Are you using a PMC2USB module or just the USB ports on the SYS card? > > - k
I am connecting to the USB port on the board using the USB adaptor. I tried both configurations (MPH and DR). I also tried the latest stable kernel (2.6.16.12) but that doesn't compile for this board. Is there a later (later than 2.16.11) kernel out there which works for this particular board? Another possibility might be that the eval board I have is bad. I can't seem to get my hands on the errata. Also waiting to hear back from Freescale folks. Prashant