> > > > I suspect he got from the same place I did, freescales LTIB > dev. env. > > which has been patched to support 832x. I am having the > same problem > > as he has, any info on what the problem might be would be great. > > > > Also, if anyone has any info on when these patches will be sent > > upstream, I sure would like to hear about it. > > > > Jocke > > Hi Joakim, > > Same here -- go into arch/ppc/platforms/83xx and edit file > mpc83xx_sys.c. > If you are using the 8323e cpu, then you need to make sure
Yes, got one of those. > that file has code to support the 8323E. Mine didn't, so I > got no platform devices initialized (no serial port, no Eth > devs). I added a block of code to support the 8323E (set > mask to 0xffff0000 and "value" to 0x80620000, then the device > list for the 8323E). Use existing code there as a guide, it > was not difficult once I figured out that this was the problem. hmm, you don't have a patch handy? > > If you are using a newer LTIB release than me, perhaps yours is fixed. > The one I have is from 3/15/06. Me too, I have requested that freescale release a new LTIB with proper support, but who knows when the will be. > > Anyway, this works fine for me and addresses the problem of > the platform devs not getting initialized. > > Chuck > > >