Hi, Support for linux 2.6 from the EDK tools does not yet work. Xilinx has contracted MontaVista to create an LSP for the ML40x development boards for MVL Pro 4.0 (which uses the 2.6.10 kernel). The LSP is anticipated to be available sometime before the end of this month.
The use of xparameters_ml403.h does not provide the complete solution for building linux 2.6 on the ml403 board. - John -----Original Message----- From: linuxppc-embedded-bounces+jbonesio=xilinx.com at ozlabs.org [mailto:[EMAIL PROTECTED] On Behalf Of "Karl Pr?fer" Sent: Thursday, June 15, 2006 6:08 AM To: linuxppc-embedded at ozlabs.org Subject: Re: xilinx ml403 with 2.6 Kernel Hello again! I had a little mistake in my first mail. I have copied the whole BSP... Now i have tried to copy only the xparameters_ml403.h in arch/ppc/platforms/4xx/xparameters/ but get the same error!! I would be more then happy when somebody could help me. nice greetings Robert -------- Original-Nachricht -------- Datum: Thu, 15 Jun 2006 12:20:55 +0200 Von: "Karl Pr?fer" <heiguga at gmx.net> An: linuxppc-embedded at ozlabs.org Betreff: xilinx ml403 with 2.6 Kernel > Hallo! > > I am not perfect in english, so please forgice me my mistakes... > > I am trying to get the 2.6 kernel running on my ml403 board... > > 1. I downloaded paulus tree: > cg-clone git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git > myprojectdir > > > 2. I copied my Xilinx BSP in the kernel dir > cp -ra <BSPDIR>/* <KERNELDIR>/ > > > 3. I configured the Makefile to use my crosscompiler and the ppc Arch. > I have built a crosstoolchain for a 2.4.26 kernel in past (with crosstool > 0.42). > I know that this toolchain works with a 2.4 kernel... > > Can i use this toolchain to compile the 2.6 kernel?? > Why do i need a kernel(some headers) to build the croostoolchain?? > > > 4. Then I configured the kernel: > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.17-rc5 > # Wed Jun 14 10:02:22 2006 > # > CONFIG_MMU=y > CONFIG_GENERIC_HARDIRQS=y > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_PPC=y > CONFIG_PPC32=y > CONFIG_GENERIC_NVRAM=y > CONFIG_GENERIC_FIND_NEXT_BIT=y > CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > # CONFIG_LOCALVERSION_AUTO is not set > # CONFIG_SWAP is not set > CONFIG_SYSVIPC=y > CONFIG_POSIX_MQUEUE=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > # CONFIG_RELAY is not set > CONFIG_INITRAMFS_SOURCE="" > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ALL is not set > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_SLAB=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > # CONFIG_SLOB is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_MODVERSIONS=y > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > > # > # Block layer > # > # CONFIG_LBD is not set > # CONFIG_BLK_DEV_IO_TRACE is not set > # CONFIG_LSF is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > CONFIG_DEFAULT_AS=y > # CONFIG_DEFAULT_DEADLINE is not set > # CONFIG_DEFAULT_CFQ is not set > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="anticipatory" > > # > # Processor > # > # CONFIG_6xx is not set > CONFIG_40x=y > # CONFIG_44x is not set > # CONFIG_8xx is not set > # CONFIG_E200 is not set > # CONFIG_E500 is not set > # CONFIG_MATH_EMULATION is not set > # CONFIG_KEXEC is not set > # CONFIG_CPU_FREQ is not set > CONFIG_4xx=y > # CONFIG_WANT_EARLY_SERIAL is not set > > # > # IBM 4xx options > # > # CONFIG_BUBINGA is not set > # CONFIG_CPCI405 is not set > # CONFIG_EP405 is not set > # CONFIG_REDWOOD_5 is not set > # CONFIG_REDWOOD_6 is not set > # CONFIG_SYCAMORE is not set > # CONFIG_WALNUT is not set > # CONFIG_XILINX_ML300 is not set > CONFIG_XILINX_ML403=y > CONFIG_IBM405_ERR77=y > CONFIG_IBM405_ERR51=y > CONFIG_XILINX_VIRTEX_4_FX=y > CONFIG_XILINX_VIRTEX=y > CONFIG_EMBEDDEDBOOT=y > # CONFIG_PPC4xx_DMA is not set > CONFIG_PPC_GEN550=y > CONFIG_UART0_TTYS0=y > # CONFIG_UART0_TTYS1 is not set > CONFIG_NOT_COHERENT_CACHE=y > > # > # Platform options > # > # CONFIG_PC_KEYBOARD is not set > # CONFIG_HIGHMEM is not set > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_SPLIT_PTLOCK_CPUS=4 > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > CONFIG_CMDLINE_BOOL=y > CONFIG_CMDLINE="console=ttyS0,9600 ip=off root=/dev/xsysace/disc0/part3 > rw" > # CONFIG_PM is not set > # CONFIG_SOFTWARE_SUSPEND is not set > CONFIG_SECCOMP=y > CONFIG_ISA_DMA_API=y > > # > # Bus options > # > # CONFIG_PPC_I8259 is not set > # CONFIG_PCI is not set > # CONFIG_PCI_DOMAINS is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # Advanced setup > # > # CONFIG_ADVANCED_OPTIONS is not set > > # > # Default settings for advanced configuration options are used > # > CONFIG_HIGHMEM_START=0xfe000000 > CONFIG_LOWMEM_SIZE=0x30000000 > CONFIG_KERNEL_START=0xc0000000 > CONFIG_TASK_SIZE=0x80000000 > CONFIG_CONSISTENT_START=0xff100000 > CONFIG_CONSISTENT_SIZE=0x00200000 > CONFIG_BOOT_LOAD=0x00400000 > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > # CONFIG_NETDEBUG is not set > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > CONFIG_IP_PNP_BOOTP=y > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > CONFIG_SYN_COOKIES=y > CONFIG_INET_AH=y > CONFIG_INET_ESP=y > CONFIG_INET_IPCOMP=y > CONFIG_INET_XFRM_TUNNEL=y > CONFIG_INET_TUNNEL=y > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_BIC=y > # CONFIG_IPV6 is not set > # CONFIG_INET6_XFRM_TUNNEL is not set > # CONFIG_INET6_TUNNEL is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > > # > # TIPC Configuration (EXPERIMENTAL) > # > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > # CONFIG_DEBUG_DRIVER is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > > # > # Block devices > # > # CONFIG_BLK_DEV_FD is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=4096 > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > # CONFIG_IDE is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > # CONFIG_SCSI is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support > # > > # > # I2O device support > # > > # > # Macintosh device drivers > # > # CONFIG_WINDFARM is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_MII is not set > # CONFIG_IBM_EMAC is not set > > # > # Ethernet (1000 Mbit) > # > > # > # Ethernet (10000 Mbit) > # > > # > # Token Ring devices > # > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > # CONFIG_INPUT_MOUSE is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > CONFIG_INPUT_MISC=y > # CONFIG_INPUT_UINPUT is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > CONFIG_SERIO_SERPORT=y > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_NVRAM is not set > # CONFIG_GEN_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_AGP is not set > # CONFIG_RAW_DRIVER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > # CONFIG_TELCLOCK is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # SPI support > # > # CONFIG_SPI is not set > # CONFIG_SPI_MASTER is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > # CONFIG_HWMON is not set > # CONFIG_HWMON_VID is not set > > # > # Misc devices > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > CONFIG_VIDEO_V4L2=y > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > # CONFIG_FB is not set > > # > # Console display driver support > # > CONFIG_DUMMY_CONSOLE=y > > # > # Sound > # > # CONFIG_SOUND is not set > > # > # USB support > # > # CONFIG_USB_ARCH_HAS_HCD is not set > # CONFIG_USB_ARCH_HAS_OHCI is not set > # CONFIG_USB_ARCH_HAS_EHCI is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # LED devices > # > # CONFIG_NEW_LEDS is not set > > # > # LED drivers > # > > # > # LED Triggers > # > > # > # InfiniBand support > # > > # > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) > # > > # > # Real Time Clock > # > # CONFIG_RTC_CLASS is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > # CONFIG_EXT3_FS_POSIX_ACL is not set > # CONFIG_EXT3_FS_SECURITY is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > # CONFIG_REISERFS_FS_XATTR is not set > # CONFIG_JFS_FS is not set > # CONFIG_FS_POSIX_ACL is not set > # CONFIG_XFS_FS is not set > # CONFIG_OCFS2_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > # CONFIG_ISO9660_FS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > # CONFIG_PROC_KCORE is not set > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > # CONFIG_CONFIGFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > # CONFIG_NFS_V3_ACL is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=y > # CONFIG_NFSD_V3 is not set > # CONFIG_NFSD_TCP is not set > # CONFIG_ROOT_NFS is not set > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_EXPORTFS=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > # CONFIG_RPCSEC_GSS_KRB5 is not set > # CONFIG_RPCSEC_GSS_SPKM3 is not set > # CONFIG_SMB_FS is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=m > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ASCII is not set > CONFIG_NLS_ISO8859_1=m > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # IBM 40x options > # > > # > # Library routines > # > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > # CONFIG_CRC32 is not set > # CONFIG_LIBCRC32C is not set > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=y > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > CONFIG_MAGIC_SYSRQ=y > CONFIG_DEBUG_KERNEL=y > CONFIG_LOG_BUF_SHIFT=14 > CONFIG_DETECT_SOFTLOCKUP=y > # CONFIG_SCHEDSTATS is not set > # CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_MUTEXES is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_DEBUG_KOBJECT is not set > # CONFIG_DEBUG_INFO is not set > # CONFIG_DEBUG_FS is not set > # CONFIG_DEBUG_VM is not set > CONFIG_FORCED_INLINING=y > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_KGDB is not set > # CONFIG_XMON is not set > # CONFIG_BDI_SWITCH is not set > # CONFIG_SERIAL_TEXT_DEBUG is not set > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > CONFIG_CRYPTO_HMAC=y > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=y > CONFIG_CRYPTO_SHA1=y > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > # CONFIG_CRYPTO_TGR192 is not set > CONFIG_CRYPTO_DES=y > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_AES is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > CONFIG_CRYPTO_DEFLATE=y > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > > > > > > > > 5. I tried to compile the kernel: > make clean bzImage modules > > and get this error: > # Temporary hack until we have migrated to asm-powerpc > CLEAN /home/freaked/WORK/ppc_kernel_2_6_paulus > CLEAN arch/ppc/kernel > CLEAN init > CLEAN usr > CLEAN .tmp_versions > CLEAN .tmp_gas_check > CHK include/linux/version.h > HOSTCC scripts/basic/fixdep > HOSTCC scripts/basic/split-include > HOSTCC scripts/basic/docproc > HOSTCC scripts/kconfig/conf.o > HOSTCC scripts/kconfig/kxgettext.o > HOSTCC scripts/kconfig/mconf.o > HOSTCC scripts/kconfig/zconf.tab.o > HOSTLD scripts/kconfig/conf > scripts/kconfig/conf -s arch/ppc/Kconfig > # > # using defaults found in .config > # > SPLIT include/linux/autoconf.h -> include/config/* > CC arch/ppc/kernel/asm-offsets.s > GEN include/asm-ppc/asm-offsets.h > HOSTCC scripts/genksyms/genksyms.o > HOSTCC scripts/genksyms/lex.o > HOSTCC scripts/genksyms/parse.o > HOSTLD scripts/genksyms/genksyms > CC scripts/mod/empty.o > HOSTCC scripts/mod/mk_elfconfig > MKELF scripts/mod/elfconfig.h > HOSTCC scripts/mod/file2alias.o > HOSTCC scripts/mod/modpost.o > HOSTCC scripts/mod/sumversion.o > HOSTLD scripts/mod/modpost > HOSTCC scripts/kallsyms > HOSTCC scripts/conmakehash > CC init/main.o > CHK include/linux/compile.h > UPD include/linux/compile.h > CC init/version.o > CC init/do_mounts.o > CC init/do_mounts_rd.o > LD init/mounts.o > CC init/initramfs.o > CC init/calibrate.o > LD init/built-in.o > HOSTCC usr/gen_init_cpio > GEN usr/initramfs_data.cpio.gz > AS usr/initramfs_data.o > LD usr/built-in.o > AS arch/ppc/kernel/entry.o > CC arch/ppc/kernel/traps.o > CC arch/ppc/kernel/time.o > AS arch/ppc/kernel/misc.o > CC arch/ppc/kernel/setup.o > CC arch/ppc/kernel/ppc_htab.o > CC arch/ppc/kernel/ppc_ksyms.o > CC arch/ppc/kernel/dma-mapping.o > LD arch/ppc/kernel/built-in.o > AS arch/ppc/kernel/head_4xx.o > LDS arch/ppc/kernel/vmlinux.lds > CC arch/powerpc/kernel/semaphore.o > CC arch/powerpc/kernel/cputable.o > CC arch/powerpc/kernel/ptrace.o > CC arch/powerpc/kernel/syscalls.o > CC arch/powerpc/kernel/irq.o > CC arch/powerpc/kernel/align.o > CC arch/powerpc/kernel/signal_32.o > arch/powerpc/kernel/signal_32.c: In function `handle_rt_signal': > arch/powerpc/kernel/signal_32.c:763: error: request for member `vdso_base' > in something not a structure or union > arch/powerpc/kernel/signal_32.c:766: error: request for member `vdso_base' > in something not a structure or union > arch/powerpc/kernel/signal_32.c: In function `handle_signal': > arch/powerpc/kernel/signal_32.c:1037: error: request for member > `vdso_base' in something not a structure or union > arch/powerpc/kernel/signal_32.c:1040: error: request for member > `vdso_base' in something not a structure or union > make[1]: *** [arch/powerpc/kernel/signal_32.o] Fehler 1 > make: *** [arch/powerpc/kernel] Fehler 2 > > > > > > > > Could someone please help me to interprete this error?? > Could someone send me an working .config file for the kernel? > > I would be more then happy when someone could help me!! > Thanks in advanced!! > > greetings Robert Zach > heiguga at gmx.net > > > -- > > > Echte DSL-Flatrate dauerhaft f?r 0,- Euro*! > "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded -- Echte DSL-Flatrate dauerhaft f?r 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded at ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
