In message <D73A25AA6E54D511AD74009027B1110F3C0500 at ORION> you wrote: > I appologize, you are correct. I sometimes think of LCD and video as the > same because I worked with a Lynx chip that allows both LCD and Video out > from the same buffer. Is it possible to use the 8xx LCD driver to drive the > video out? I believe the only section that needs to be changed is the > function that initializes the LCD registers, I may be off though.
It's more complicated, since the video controller will not support a plain framebuffer, but only YUYV video mode. What happened to the video driver for the EP boards? It was available once on MV's FTP server - does not even EP has a copy any more? [Asking just out of curiousity, as we've already reimplemented all the stuff we needed - no NTSC support yet, though]. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de As far as we know, our computer has never had an undetected error. -- Weisert ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/