Hi, I am trying to boot up the Linux kgdb-kernel.2.4.18 on a Walnut board, but it just freezes after it uncompressed the kernel. Here is a screen shot: ".. EMAC0 Ethernet Test OK. ENET Speed is 100 Mbs... FULL duplex connection Booting from [ENET] Ethernet ... Sending bootp request ...
Loading file "//zImage" ... Sending tftp boot request ... Transfer Complete ... Loaded successfully ... Entry point at 0x500000 ... loaded at: 00500000 005A9238 relocated to: 00400000 004A9238 board data at: 004A6168 004A61A8 relocated to: 004A6128 004A6168 zimage at: 004059DC 004A54DA avail ram: 004AA000 02000000 Linux/PPC load: root=/dev/nfs ip=192.003.1.5:192.003.1.1::255.255.255.0:walnut:eth0:off nfsroot=192.168.1.1:/home/nfs/walnut Uncompressing Linux...done. Now booting the kernel ..." And it just hangs. I think this when it's waiting for input from the serial port 2 from the debugger then proceeds. I hooked up an other session of minicom to the second serial port on the Walnut, but only see garbages, "$S04#b7,..." . I tried all the baudrates available and got different outputs or blank, all of which are incomprehensible. Has anyone got the Linux kgdb-kernel.2.4.18 to work with the Walnut board? Any help would be appreciated, Andy ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/