Hi Ming, > I tried the new patches in such a procedure: download the kernel, apply > the five Temac patches, apply the patch > linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch, copy and replace > xparameters_ml403.h and use the one generated by EDK (I don't know if > this is right. But there is really no modification in your patch for the > ml403 xparameters file.). Then make menuconfig, make dep and make > zImage. Still the same problem as former. Yes! This procedure is correct. But you still get errors? hmmm... The log file you sent is too long with mostly unnecessary stuffs. A normal log "make zImage" without verbose output will suffice. Please can you send me the new log?
> Is there any problem in the sequence according to which I applied the > patches? Or other problems? But why the problem still happened? If I > made a wrong operation, please forgive me because I am a novice. That's > why I would like to describe the procedure as detailed as possible. I appreciate you testing the patch. Don't worry... we will solve it. And I am not an expert either... you probably know more than me! -Ameet > > > >> From: Ameet Patil <ammubhai at gmail.com> >> To: Ming Liu <eemingliu at hotmail.com> >> CC: linuxppc-embedded at ozlabs.org >> Subject: Re: some problems on the SystemACE driver. >> Date: Fri, 14 Jul 2006 16:10:54 +0100 >> >> Ming, >> Had a look, both patches define the XILINX_OCP functions which is >> unavoidable really. I have made some changes only so that it works in >> your scenario. First apply the TEMAC patch and then this one: >> https://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch >> >> > >> >> Also, I have also made some new changes to the SysAce driver patch. New >> version is here: >> https://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2.patch >> >> > >> >> No, you donot need to apply all the patches found in my patches folder. >> >> Let me know what happens? I think it should work.... >> >> -Ameet >> >> Ming Liu wrote: >> > Dear Ameet, >> > The attached is the log file to record the error. Please unzip and >> > search for "XAssert" to go to the end to see the problem. Also, the >> > .config file is attached. Please rename the file from config into >> > .config. The linux version is 2.6.17.1. When you compile the kernel, >> > please remember to export C_INCLUDE_PATH=....../driver/xilinx_edk. >> > Thanks for your work. >> > >> > Regards >> > Ming >> > >> > >> >> From: Ameet Patil <ammubhai at gmail.com> >> >> To: Ming Liu <eemingliu at hotmail.com> >> >> CC: linuxppc-embedded at ozlabs.org >> >> Subject: Re: some problems on the SystemACE driver. >> >> Date: Fri, 14 Jul 2006 12:12:36 +0100 >> >> >> >> Hi Ming, >> >> Can you send me the entire text output (in a file) of the > compilation >> >> process with errors? >> >> >> >> -Ameet >> >> >> >> Ming Liu wrote: >> >> > Dear Ameet, >> >> > >> >> >> 1. Which TEMAC patch are you using? >> >> >> >> > > (http://source.mvista.com/~ank/paulus-powerpc/20060309/ppc32_xilinx_edk_temac.patch) > > > >> > >> > >> >> >> >> >> > >> >> > There are five patches in the directory 20060309 whose address is >> > listed >> >> > above by you. I applied all of them in my system, because without > any >> >> > there will be problems. >> >> >> 2. After applying the patch, is the driver getting compiled > directly >> >> >> without having to select it via "make menuconfig"? >> >> > No. there is an option named "xilinx 10/100/1000 Mbit TEMAC support" > in >> >> > the menuconfig. I must select it and then compile the kernel. >> >> >> 3. I don't see a Makefile in the drivers/net/xilinx_temac/ folder? >> >> > I have checked. In my kernel, there is the Makefile. I don't know > why >> >> > this happened to you. >> >> > >> >> > Let me describe the detailed process I did. First, download the > kernel >> >> > 2.6.17.1 (or 2.6.16-rc5). Then apply the five patches for Temac.(If > I >> >> > use 2.6.17.1, I need to upgrade some files manually. For 2.6.16, > there >> >> > is no problem.) And then apply the patch for SystemACE. Also copy > and >> >> > replace the xparameters_ml403.h by my own file generated by EDK. > Then >> >> > make menuconfig, selecting both Temac and SystemACE and other basic >> >> > options. Then make dep and make zImage. During this process, I need > to >> >> > modify some little problems which are about the inclusion of some >> > header >> >> > files, or specify some lib inclusion directories instead. Then that >> >> > problem appears. There are some main points: 1. configured for ml403 >> >> > board. 2.both Temac and SystemACE are selected. 3. 5 patches for > Temac >> >> > and 1 patch for SystemACE. 4. linux version is 2.6.17 or 2.6.16. I >> >> > really have no idea why this still happens after your modification. > So >> > I >> >> > have to ask you again. >> >> >> Ofcourse, I can work my way to compile the driver. But is there any >> > doc. >> >> >> present explaining this? >> >> > Sorry that there is no doc to explain this. I just did following the >> >> > procedure described above. I am totally lost. The strange thing is, >> > when >> >> > I select only one of these two drivers, no problem, but if both, >> > problem. >> >> > By the way, I noticed that in the address where I get your patch, > there >> >> > is also a patch called linuxppc-2.6.17.1-sysace-1.0.patch which is > much >> >> > larger than the 1.1 one. I needn't apply the 1.0 one, right? >> >> > Thanks for your hard work. Hopefully we can solve the problem. >> >> > Regards >> >> > Ming >> >> > >> >> > _________________________________________________________________ >> >> > ???? MSN Explorer: http://explorer.msn.com/lccn >> >> > >> > >> > _________________________________________________________________ >> > ???? MSN Explorer: http://explorer.msn.com/lccn # >> > # Automatically generated make config: don't edit >> > # Linux kernel version: 2.6.17.1 >> > # Fri Jul 14 15:00:57 2006 >> > # >> > CONFIG_MMU=y >> > CONFIG_GENERIC_HARDIRQS=y >> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y >> > CONFIG_GENERIC_HWEIGHT=y >> > CONFIG_GENERIC_CALIBRATE_DELAY=y >> > CONFIG_PPC=y >> > CONFIG_PPC32=y >> > CONFIG_GENERIC_NVRAM=y >> > CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y >> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y >> > >> > # >> > # Code maturity level options >> > # >> > CONFIG_EXPERIMENTAL=y >> > CONFIG_BROKEN_ON_SMP=y >> > CONFIG_INIT_ENV_ARG_LIMIT=32 >> > >> > # >> > # General setup >> > # >> > CONFIG_LOCALVERSION="" >> > CONFIG_LOCALVERSION_AUTO=y >> > CONFIG_SWAP=y >> > CONFIG_SYSVIPC=y >> > # CONFIG_POSIX_MQUEUE is not set >> > # CONFIG_BSD_PROCESS_ACCT is not set >> > CONFIG_SYSCTL=y >> > # CONFIG_AUDIT is not set >> > # CONFIG_IKCONFIG is not set >> > # CONFIG_RELAY is not set >> > CONFIG_INITRAMFS_SOURCE="" >> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y >> > # CONFIG_EMBEDDED is not set >> > CONFIG_KALLSYMS=y >> > # CONFIG_KALLSYMS_ALL is not set >> > # CONFIG_KALLSYMS_EXTRA_PASS is not set >> > CONFIG_HOTPLUG=y >> > CONFIG_PRINTK=y >> > CONFIG_BUG=y >> > CONFIG_ELF_CORE=y >> > CONFIG_BASE_FULL=y >> > CONFIG_FUTEX=y >> > CONFIG_EPOLL=y >> > CONFIG_SHMEM=y >> > CONFIG_SLAB=y >> > # CONFIG_TINY_SHMEM is not set >> > CONFIG_BASE_SMALL=0 >> > # CONFIG_SLOB is not set >> > CONFIG_OBSOLETE_INTERMODULE=y >> > >> > # >> > # Loadable module support >> > # >> > # CONFIG_MODULES is not set >> > >> > # >> > # Block layer >> > # >> > # CONFIG_LBD is not set >> > # CONFIG_BLK_DEV_IO_TRACE is not set >> > # CONFIG_LSF is not set >> > >> > # >> > # IO Schedulers >> > # >> > CONFIG_IOSCHED_NOOP=y >> > CONFIG_IOSCHED_AS=y >> > CONFIG_IOSCHED_DEADLINE=y >> > CONFIG_IOSCHED_CFQ=y >> > CONFIG_DEFAULT_AS=y >> > # CONFIG_DEFAULT_DEADLINE is not set >> > # CONFIG_DEFAULT_CFQ is not set >> > # CONFIG_DEFAULT_NOOP is not set >> > CONFIG_DEFAULT_IOSCHED="anticipatory" >> > >> > # >> > # Processor >> > # >> > # CONFIG_6xx is not set >> > CONFIG_40x=y >> > # CONFIG_44x is not set >> > # CONFIG_8xx is not set >> > # CONFIG_E200 is not set >> > # CONFIG_E500 is not set >> > CONFIG_MATH_EMULATION=y >> > # CONFIG_KEXEC is not set >> > # CONFIG_CPU_FREQ is not set >> > CONFIG_4xx=y >> > # CONFIG_WANT_EARLY_SERIAL is not set >> > >> > # >> > # IBM 4xx options >> > # >> > # CONFIG_BUBINGA is not set >> > # CONFIG_CPCI405 is not set >> > # CONFIG_EP405 is not set >> > # CONFIG_REDWOOD_5 is not set >> > # CONFIG_REDWOOD_6 is not set >> > # CONFIG_SYCAMORE is not set >> > # CONFIG_WALNUT is not set >> > # CONFIG_XILINX_ML300 is not set >> > CONFIG_XILINX_ML403=y >> > CONFIG_IBM405_ERR77=y >> > CONFIG_IBM405_ERR51=y >> > CONFIG_XILINX_VIRTEX_4_FX=y >> > CONFIG_XILINX_VIRTEX=y >> > CONFIG_EMBEDDEDBOOT=y >> > # CONFIG_PPC4xx_DMA is not set >> > CONFIG_PPC_GEN550=y >> > CONFIG_UART0_TTYS0=y >> > # CONFIG_UART0_TTYS1 is not set >> > CONFIG_NOT_COHERENT_CACHE=y >> > >> > # >> > # Platform options >> > # >> > # CONFIG_PC_KEYBOARD is not set >> > # CONFIG_HIGHMEM is not set >> > # CONFIG_HZ_100 is not set >> > CONFIG_HZ_250=y >> > # CONFIG_HZ_1000 is not set >> > CONFIG_HZ=250 >> > CONFIG_PREEMPT_NONE=y >> > # CONFIG_PREEMPT_VOLUNTARY is not set >> > # CONFIG_PREEMPT is not set >> > CONFIG_SELECT_MEMORY_MODEL=y >> > CONFIG_FLATMEM_MANUAL=y >> > # CONFIG_DISCONTIGMEM_MANUAL is not set >> > # CONFIG_SPARSEMEM_MANUAL is not set >> > CONFIG_FLATMEM=y >> > CONFIG_FLAT_NODE_MEM_MAP=y >> > # CONFIG_SPARSEMEM_STATIC is not set >> > CONFIG_SPLIT_PTLOCK_CPUS=4 >> > CONFIG_BINFMT_ELF=y >> > # CONFIG_BINFMT_MISC is not set >> > CONFIG_CMDLINE_BOOL=y >> > CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/xsa3 rw" >> > # CONFIG_PM is not set >> > # CONFIG_SOFTWARE_SUSPEND is not set >> > CONFIG_SECCOMP=y >> > CONFIG_ISA_DMA_API=y >> > >> > # >> > # Bus options >> > # >> > # CONFIG_PPC_I8259 is not set >> > # CONFIG_PCI is not set >> > # CONFIG_PCI_DOMAINS is not set >> > >> > # >> > # PCCARD (PCMCIA/CardBus) support >> > # >> > # CONFIG_PCCARD is not set >> > >> > # >> > # Advanced setup >> > # >> > # CONFIG_ADVANCED_OPTIONS is not set >> > >> > # >> > # Default settings for advanced configuration options are used >> > # >> > CONFIG_HIGHMEM_START=0xfe000000 >> > CONFIG_LOWMEM_SIZE=0x30000000 >> > CONFIG_KERNEL_START=0xc0000000 >> > CONFIG_TASK_SIZE=0x80000000 >> > CONFIG_CONSISTENT_START=0xff100000 >> > CONFIG_CONSISTENT_SIZE=0x00200000 >> > CONFIG_BOOT_LOAD=0x00400000 >> > >> > # >> > # Networking >> > # >> > CONFIG_NET=y >> > >> > # >> > # Networking options >> > # >> > # CONFIG_NETDEBUG is not set >> > # CONFIG_PACKET is not set >> > CONFIG_UNIX=y >> > # CONFIG_NET_KEY is not set >> > CONFIG_INET=y >> > CONFIG_IP_MULTICAST=y >> > # CONFIG_IP_ADVANCED_ROUTER is not set >> > CONFIG_IP_FIB_HASH=y >> > CONFIG_IP_PNP=y >> > CONFIG_IP_PNP_DHCP=y >> > # CONFIG_IP_PNP_BOOTP is not set >> > # CONFIG_IP_PNP_RARP is not set >> > # CONFIG_NET_IPIP is not set >> > # CONFIG_NET_IPGRE is not set >> > # CONFIG_IP_MROUTE is not set >> > # CONFIG_ARPD is not set >> > CONFIG_SYN_COOKIES=y >> > # CONFIG_INET_AH is not set >> > # CONFIG_INET_ESP is not set >> > # CONFIG_INET_IPCOMP is not set >> > # CONFIG_INET_XFRM_TUNNEL is not set >> > # CONFIG_INET_TUNNEL is not set >> > # CONFIG_INET_DIAG is not set >> > # CONFIG_TCP_CONG_ADVANCED is not set >> > CONFIG_TCP_CONG_BIC=y >> > # CONFIG_IPV6 is not set >> > # CONFIG_INET6_XFRM_TUNNEL is not set >> > # CONFIG_INET6_TUNNEL is not set >> > # CONFIG_NETFILTER is not set >> > >> > # >> > # DCCP Configuration (EXPERIMENTAL) >> > # >> > # CONFIG_IP_DCCP is not set >> > >> > # >> > # SCTP Configuration (EXPERIMENTAL) >> > # >> > # CONFIG_IP_SCTP is not set >> > >> > # >> > # TIPC Configuration (EXPERIMENTAL) >> > # >> > # CONFIG_TIPC is not set >> > # CONFIG_ATM is not set >> > # CONFIG_BRIDGE is not set >> > # CONFIG_VLAN_8021Q is not set >> > # CONFIG_DECNET is not set >> > # CONFIG_LLC2 is not set >> > # CONFIG_IPX is not set >> > # CONFIG_ATALK is not set >> > # CONFIG_X25 is not set >> > # CONFIG_LAPB is not set >> > # CONFIG_NET_DIVERT is not set >> > # CONFIG_ECONET is not set >> > # CONFIG_WAN_ROUTER is not set >> > >> > # >> > # QoS and/or fair queueing >> > # >> > # CONFIG_NET_SCHED is not set >> > >> > # >> > # Network testing >> > # >> > # CONFIG_NET_PKTGEN is not set >> > # CONFIG_HAMRADIO is not set >> > # CONFIG_IRDA is not set >> > # CONFIG_BT is not set >> > # CONFIG_IEEE80211 is not set >> > >> > # >> > # Device Drivers >> > # >> > >> > # >> > # Generic Driver Options >> > # >> > CONFIG_STANDALONE=y >> > CONFIG_PREVENT_FIRMWARE_BUILD=y >> > # CONFIG_FW_LOADER is not set >> > # CONFIG_DEBUG_DRIVER is not set >> > >> > # >> > # Connector - unified userspace <-> kernelspace linker >> > # >> > # CONFIG_CONNECTOR is not set >> > >> > # >> > # Memory Technology Devices (MTD) >> > # >> > CONFIG_MTD=y >> > # CONFIG_MTD_DEBUG is not set >> > # CONFIG_MTD_CONCAT is not set >> > CONFIG_MTD_PARTITIONS=y >> > CONFIG_MTD_REDBOOT_PARTS=y >> > CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 >> > # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set >> > # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set >> > # CONFIG_MTD_CMDLINE_PARTS is not set >> > >> > # >> > # User Modules And Translation Layers >> > # >> > CONFIG_MTD_CHAR=y >> > CONFIG_MTD_BLOCK=y >> > # CONFIG_FTL is not set >> > # CONFIG_NFTL is not set >> > # CONFIG_INFTL is not set >> > # CONFIG_RFD_FTL is not set >> > >> > # >> > # RAM/ROM/Flash chip drivers >> > # >> > CONFIG_MTD_CFI=y >> > # CONFIG_MTD_JEDECPROBE is not set >> > CONFIG_MTD_GEN_PROBE=y >> > # CONFIG_MTD_CFI_ADV_OPTIONS is not set >> > CONFIG_MTD_MAP_BANK_WIDTH_1=y >> > CONFIG_MTD_MAP_BANK_WIDTH_2=y >> > CONFIG_MTD_MAP_BANK_WIDTH_4=y >> > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set >> > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set >> > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set >> > CONFIG_MTD_CFI_I1=y >> > CONFIG_MTD_CFI_I2=y >> > # CONFIG_MTD_CFI_I4 is not set >> > # CONFIG_MTD_CFI_I8 is not set >> > # CONFIG_MTD_CFI_INTELEXT is not set >> > CONFIG_MTD_CFI_AMDSTD=y >> > # CONFIG_MTD_CFI_STAA is not set >> > CONFIG_MTD_CFI_UTIL=y >> > # CONFIG_MTD_RAM is not set >> > # CONFIG_MTD_ROM is not set >> > # CONFIG_MTD_ABSENT is not set >> > # CONFIG_MTD_OBSOLETE_CHIPS is not set >> > >> > # >> > # Mapping drivers for chip access >> > # >> > # CONFIG_MTD_COMPLEX_MAPPINGS is not set >> > # CONFIG_MTD_PHYSMAP is not set >> > # CONFIG_MTD_PLATRAM is not set >> > >> > # >> > # Self-contained MTD device drivers >> > # >> > # CONFIG_MTD_SLRAM is not set >> > # CONFIG_MTD_PHRAM is not set >> > # CONFIG_MTD_MTDRAM is not set >> > # CONFIG_MTD_BLOCK2MTD is not set >> > >> > # >> > # Disk-On-Chip Device Drivers >> > # >> > # CONFIG_MTD_DOC2000 is not set >> > # CONFIG_MTD_DOC2001 is not set >> > # CONFIG_MTD_DOC2001PLUS is not set >> > >> > # >> > # NAND Flash Device Drivers >> > # >> > # CONFIG_MTD_NAND is not set >> > >> > # >> > # OneNAND Flash Device Drivers >> > # >> > # CONFIG_MTD_ONENAND is not set >> > >> > # >> > # Parallel port support >> > # >> > # CONFIG_PARPORT is not set >> > >> > # >> > # Plug and Play support >> > # >> > >> > # >> > # Block devices >> > # >> > # CONFIG_BLK_DEV_FD is not set >> > # CONFIG_BLK_DEV_COW_COMMON is not set >> > CONFIG_BLK_DEV_LOOP=y >> > # CONFIG_BLK_DEV_CRYPTOLOOP is not set >> > CONFIG_XILINX_SYSACE=y >> > # CONFIG_BLK_DEV_NBD is not set >> > # CONFIG_BLK_DEV_RAM is not set >> > # CONFIG_BLK_DEV_INITRD is not set >> > # CONFIG_CDROM_PKTCDVD is not set >> > # CONFIG_ATA_OVER_ETH is not set >> > >> > # >> > # ATA/ATAPI/MFM/RLL support >> > # >> > # CONFIG_IDE is not set >> > >> > # >> > # SCSI device support >> > # >> > # CONFIG_RAID_ATTRS is not set >> > # CONFIG_SCSI is not set >> > >> > # >> > # Multi-device support (RAID and LVM) >> > # >> > # CONFIG_MD is not set >> > >> > # >> > # Fusion MPT device support >> > # >> > # CONFIG_FUSION is not set >> > >> > # >> > # IEEE 1394 (FireWire) support >> > # >> > >> > # >> > # I2O device support >> > # >> > >> > # >> > # Macintosh device drivers >> > # >> > # CONFIG_WINDFARM is not set >> > >> > # >> > # Network device support >> > # >> > CONFIG_NETDEVICES=y >> > # CONFIG_DUMMY is not set >> > # CONFIG_BONDING is not set >> > # CONFIG_EQUALIZER is not set >> > # CONFIG_TUN is not set >> > >> > # >> > # PHY device support >> > # >> > >> > # >> > # Ethernet (10 or 100Mbit) >> > # >> > # CONFIG_NET_ETHERNET is not set >> > # CONFIG_IBM_EMAC is not set >> > >> > # >> > # Ethernet (1000 Mbit) >> > # >> > CONFIG_XILINX_TEMAC=y >> > >> > # >> > # Ethernet (10000 Mbit) >> > # >> > >> > # >> > # Token Ring devices >> > # >> > >> > # >> > # Wireless LAN (non-hamradio) >> > # >> > # CONFIG_NET_RADIO is not set >> > >> > # >> > # Wan interfaces >> > # >> > # CONFIG_WAN is not set >> > # CONFIG_PPP is not set >> > # CONFIG_SLIP is not set >> > # CONFIG_SHAPER is not set >> > # CONFIG_NETCONSOLE is not set >> > # CONFIG_NETPOLL is not set >> > # CONFIG_NET_POLL_CONTROLLER is not set >> > >> > # >> > # ISDN subsystem >> > # >> > # CONFIG_ISDN is not set >> > >> > # >> > # Telephony Support >> > # >> > # CONFIG_PHONE is not set >> > >> > # >> > # Input device support >> > # >> > CONFIG_INPUT=y >> > >> > # >> > # Userland interfaces >> > # >> > CONFIG_INPUT_MOUSEDEV=y >> > CONFIG_INPUT_MOUSEDEV_PSAUX=y >> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 >> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 >> > # CONFIG_INPUT_JOYDEV is not set >> > # CONFIG_INPUT_TSDEV is not set >> > # CONFIG_INPUT_EVDEV is not set >> > # CONFIG_INPUT_EVBUG is not set >> > >> > # >> > # Input Device Drivers >> > # >> > # CONFIG_INPUT_KEYBOARD is not set >> > # CONFIG_INPUT_MOUSE is not set >> > # CONFIG_INPUT_JOYSTICK is not set >> > # CONFIG_INPUT_TOUCHSCREEN is not set >> > # CONFIG_INPUT_MISC is not set >> > >> > # >> > # Hardware I/O ports >> > # >> > CONFIG_SERIO=y >> > CONFIG_SERIO_I8042=y >> > CONFIG_SERIO_SERPORT=y >> > # CONFIG_SERIO_RAW is not set >> > # CONFIG_GAMEPORT is not set >> > >> > # >> > # Character devices >> > # >> > CONFIG_VT=y >> > CONFIG_VT_CONSOLE=y >> > CONFIG_HW_CONSOLE=y >> > # CONFIG_SERIAL_NONSTANDARD is not set >> > >> > # >> > # Serial drivers >> > # >> > CONFIG_SERIAL_8250=y >> > CONFIG_SERIAL_8250_CONSOLE=y >> > CONFIG_SERIAL_8250_NR_UARTS=4 >> > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 >> > # CONFIG_SERIAL_8250_EXTENDED is not set >> > >> > # >> > # Non-8250 serial port support >> > # >> > CONFIG_SERIAL_CORE=y >> > CONFIG_SERIAL_CORE_CONSOLE=y >> > CONFIG_UNIX98_PTYS=y >> > CONFIG_LEGACY_PTYS=y >> > CONFIG_LEGACY_PTY_COUNT=256 >> > >> > # >> > # IPMI >> > # >> > # CONFIG_IPMI_HANDLER is not set >> > >> > # >> > # Watchdog Cards >> > # >> > # CONFIG_WATCHDOG is not set >> > # CONFIG_NVRAM is not set >> > # CONFIG_GEN_RTC is not set >> > # CONFIG_DTLK is not set >> > # CONFIG_R3964 is not set >> > >> > # >> > # Ftape, the floppy tape device driver >> > # >> > # CONFIG_AGP is not set >> > # CONFIG_RAW_DRIVER is not set >> > >> > # >> > # TPM devices >> > # >> > # CONFIG_TCG_TPM is not set >> > # CONFIG_TELCLOCK is not set >> > >> > # >> > # I2C support >> > # >> > # CONFIG_I2C is not set >> > >> > # >> > # SPI support >> > # >> > # CONFIG_SPI is not set >> > # CONFIG_SPI_MASTER is not set >> > >> > # >> > # Dallas's 1-wire bus >> > # >> > # CONFIG_W1 is not set >> > >> > # >> > # Hardware Monitoring support >> > # >> > CONFIG_HWMON=y >> > # CONFIG_HWMON_VID is not set >> > # CONFIG_SENSORS_F71805F is not set >> > # CONFIG_HWMON_DEBUG_CHIP is not set >> > >> > # >> > # Misc devices >> > # >> > >> > # >> > # Multimedia devices >> > # >> > # CONFIG_VIDEO_DEV is not set >> > CONFIG_VIDEO_V4L2=y >> > >> > # >> > # Digital Video Broadcasting Devices >> > # >> > # CONFIG_DVB is not set >> > >> > # >> > # Graphics support >> > # >> > # CONFIG_FB is not set >> > >> > # >> > # Console display driver support >> > # >> > CONFIG_DUMMY_CONSOLE=y >> > >> > # >> > # Sound >> > # >> > # CONFIG_SOUND is not set >> > >> > # >> > # USB support >> > # >> > # CONFIG_USB_ARCH_HAS_HCD is not set >> > # CONFIG_USB_ARCH_HAS_OHCI is not set >> > # CONFIG_USB_ARCH_HAS_EHCI is not set >> > >> > # >> > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' >> > # >> > >> > # >> > # USB Gadget Support >> > # >> > # CONFIG_USB_GADGET is not set >> > >> > # >> > # MMC/SD Card support >> > # >> > # CONFIG_MMC is not set >> > >> > # >> > # LED devices >> > # >> > # CONFIG_NEW_LEDS is not set >> > >> > # >> > # LED drivers >> > # >> > >> > # >> > # LED Triggers >> > # >> > >> > # >> > # InfiniBand support >> > # >> > >> > # >> > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) >> > # >> > >> > # >> > # Real Time Clock >> > # >> > # CONFIG_RTC_CLASS is not set >> > CONFIG_XILINX_EDK=y >> > >> > # >> > # File systems >> > # >> > CONFIG_EXT2_FS=y >> > CONFIG_EXT2_FS_XATTR=y >> > CONFIG_EXT2_FS_POSIX_ACL=y >> > CONFIG_EXT2_FS_SECURITY=y >> > CONFIG_EXT2_FS_XIP=y >> > CONFIG_FS_XIP=y >> > # CONFIG_EXT3_FS is not set >> > CONFIG_FS_MBCACHE=y >> > # CONFIG_REISERFS_FS is not set >> > # CONFIG_JFS_FS is not set >> > CONFIG_FS_POSIX_ACL=y >> > # CONFIG_XFS_FS is not set >> > # CONFIG_OCFS2_FS is not set >> > # CONFIG_MINIX_FS is not set >> > # CONFIG_ROMFS_FS is not set >> > CONFIG_INOTIFY=y >> > # CONFIG_QUOTA is not set >> > CONFIG_DNOTIFY=y >> > CONFIG_AUTOFS_FS=y >> > CONFIG_AUTOFS4_FS=y >> > # CONFIG_FUSE_FS is not set >> > >> > # >> > # CD-ROM/DVD Filesystems >> > # >> > # CONFIG_ISO9660_FS is not set >> > # CONFIG_UDF_FS is not set >> > >> > # >> > # DOS/FAT/NT Filesystems >> > # >> > # CONFIG_MSDOS_FS is not set >> > # CONFIG_VFAT_FS is not set >> > # CONFIG_NTFS_FS is not set >> > >> > # >> > # Pseudo filesystems >> > # >> > CONFIG_PROC_FS=y >> > CONFIG_PROC_KCORE=y >> > CONFIG_SYSFS=y >> > CONFIG_TMPFS=y >> > # CONFIG_HUGETLB_PAGE is not set >> > CONFIG_RAMFS=y >> > # CONFIG_CONFIGFS_FS is not set >> > >> > # >> > # Miscellaneous filesystems >> > # >> > # CONFIG_ADFS_FS is not set >> > # CONFIG_AFFS_FS is not set >> > # CONFIG_HFS_FS is not set >> > # CONFIG_HFSPLUS_FS is not set >> > # CONFIG_BEFS_FS is not set >> > # CONFIG_BFS_FS is not set >> > # CONFIG_EFS_FS is not set >> > # CONFIG_JFFS_FS is not set >> > # CONFIG_JFFS2_FS is not set >> > # CONFIG_CRAMFS is not set >> > # CONFIG_VXFS_FS is not set >> > # CONFIG_HPFS_FS is not set >> > # CONFIG_QNX4FS_FS is not set >> > # CONFIG_SYSV_FS is not set >> > # CONFIG_UFS_FS is not set >> > >> > # >> > # Network File Systems >> > # >> > # CONFIG_NFS_FS is not set >> > # CONFIG_NFSD is not set >> > # CONFIG_SMB_FS is not set >> > # CONFIG_CIFS is not set >> > # CONFIG_NCP_FS is not set >> > # CONFIG_CODA_FS is not set >> > # CONFIG_AFS_FS is not set >> > # CONFIG_9P_FS is not set >> > >> > # >> > # Partition Types >> > # >> > # CONFIG_PARTITION_ADVANCED is not set >> > CONFIG_MSDOS_PARTITION=y >> > >> > # >> > # Native Language Support >> > # >> > CONFIG_NLS=y >> > CONFIG_NLS_DEFAULT="iso8859-1" >> > # CONFIG_NLS_CODEPAGE_437 is not set >> > # CONFIG_NLS_CODEPAGE_737 is not set >> > # CONFIG_NLS_CODEPAGE_775 is not set >> > # CONFIG_NLS_CODEPAGE_850 is not set >> > # CONFIG_NLS_CODEPAGE_852 is not set >> > # CONFIG_NLS_CODEPAGE_855 is not set >> > # CONFIG_NLS_CODEPAGE_857 is not set >> > # CONFIG_NLS_CODEPAGE_860 is not set >> > # CONFIG_NLS_CODEPAGE_861 is not set >> > # CONFIG_NLS_CODEPAGE_862 is not set >> > # CONFIG_NLS_CODEPAGE_863 is not set >> > # CONFIG_NLS_CODEPAGE_864 is not set >> > # CONFIG_NLS_CODEPAGE_865 is not set >> > # CONFIG_NLS_CODEPAGE_866 is not set >> > # CONFIG_NLS_CODEPAGE_869 is not set >> > # CONFIG_NLS_CODEPAGE_936 is not set >> > # CONFIG_NLS_CODEPAGE_950 is not set >> > # CONFIG_NLS_CODEPAGE_932 is not set >> > # CONFIG_NLS_CODEPAGE_949 is not set >> > # CONFIG_NLS_CODEPAGE_874 is not set >> > # CONFIG_NLS_ISO8859_8 is not set >> > # CONFIG_NLS_CODEPAGE_1250 is not set >> > # CONFIG_NLS_CODEPAGE_1251 is not set >> > # CONFIG_NLS_ASCII is not set >> > # CONFIG_NLS_ISO8859_1 is not set >> > # CONFIG_NLS_ISO8859_2 is not set >> > # CONFIG_NLS_ISO8859_3 is not set >> > # CONFIG_NLS_ISO8859_4 is not set >> > # CONFIG_NLS_ISO8859_5 is not set >> > # CONFIG_NLS_ISO8859_6 is not set >> > # CONFIG_NLS_ISO8859_7 is not set >> > # CONFIG_NLS_ISO8859_9 is not set >> > # CONFIG_NLS_ISO8859_13 is not set >> > # CONFIG_NLS_ISO8859_14 is not set >> > # CONFIG_NLS_ISO8859_15 is not set >> > # CONFIG_NLS_KOI8_R is not set >> > # CONFIG_NLS_KOI8_U is not set >> > # CONFIG_NLS_UTF8 is not set >> > >> > # >> > # IBM 40x options >> > # >> > >> > # >> > # Library routines >> > # >> > # CONFIG_CRC_CCITT is not set >> > # CONFIG_CRC16 is not set >> > CONFIG_CRC32=y >> > # CONFIG_LIBCRC32C is not set >> > # CONFIG_PROFILING is not set >> > >> > # >> > # Kernel hacking >> > # >> > # CONFIG_PRINTK_TIME is not set >> > # CONFIG_MAGIC_SYSRQ is not set >> > CONFIG_DEBUG_KERNEL=y >> > CONFIG_LOG_BUF_SHIFT=14 >> > CONFIG_DETECT_SOFTLOCKUP=y >> > # CONFIG_SCHEDSTATS is not set >> > # CONFIG_DEBUG_SLAB is not set >> > # CONFIG_DEBUG_MUTEXES is not set >> > # CONFIG_DEBUG_SPINLOCK is not set >> > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set >> > # CONFIG_DEBUG_KOBJECT is not set >> > CONFIG_DEBUG_INFO=y >> > # CONFIG_DEBUG_FS is not set >> > # CONFIG_DEBUG_VM is not set >> > # CONFIG_UNWIND_INFO is not set >> > CONFIG_FORCED_INLINING=y >> > # CONFIG_RCU_TORTURE_TEST is not set >> > # CONFIG_KGDB is not set >> > # CONFIG_XMON is not set >> > CONFIG_BDI_SWITCH=y >> > # CONFIG_SERIAL_TEXT_DEBUG is not set >> > >> > # >> > # Security options >> > # >> > # CONFIG_KEYS is not set >> > # CONFIG_SECURITY is not set >> > >> > # >> > # Cryptographic options >> > # >> > # CONFIG_CRYPTO is not set >> > >> > # >> > # Hardware crypto devices >> > # >> > > > _________________________________________________________________ > ??????????????? MSN Hotmail? http://www.hotmail.com >