Thanks for the info! I'm also using an icecube board. I'll grab the code from mv when you post it there. Do you use a bootloader or do you just use dbug to run a zImage?
-Chris H. >On Wed, Apr 23, 2003 at 09:55:42PM +0000, Chris Heintzelman wrote: > > >>I noticed that a few months ago someone mentioned booting Linux on one >>of these boards (MGT5100). There didn't seem to be much discussion >>though; I have one of these boards and would also like to boot linux on >>it, I'm wondering if anyone can point me to a good starting point on >>this? Any help is appreciated. I've got a toolchain and kernel built >>but am having no luck with it. >> >>Thanks, >>Chris H. >> >> > >I've been working with Kent Borg to bring up linux on the mgt5100. >As Peter said, they're running it on an icecube, while I have a glacier >system. The serial driver seems reasonably solid. I've been working >on an ethernet driver and started testing it today. It has sent and >received a few packets but lots of cleanup remains. I plan to put up a >bk repository on source.mvista.com in a couple of weeks. I could send >you a tarball if you'd rather not wait. > >-Dale Farnsworth > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/