<newbie alert!> I've just undertaken trying to get a Sandpoint 8240 to boot ppc linux. I have the mvista CDK 1.2, as well as the code from ftp://ftp.mvista.com:/pub/Area51/sandpoint-8240/README
My development platform is RH6.2 linux. I'm running version 12.0 of DINK. Here come the questions :) 1) I tried compiling the code in spdemo-2.3.16-2000.02.10, but it insists on a ramdisk.image.gz file. I tried removing the RAMDISK entry from .config, but them got compile errors. I see instructions on how to build a ramdisk, but - how do I put the right ppc files in the ram disk if I don't have a ppc system to get them from? 2) I resorted to compiling the linux-2.4.0-test2 kernel, and it compiled with the additional network card I needed (tulip). However, when I boot, I get DINK32_MAX >>go 900000 loaded at: 00900000 00914E20 relocated to: 00800000 00814E20 zimage at: 0090B000 00988955 avail ram: 00400000 00800000 Linux/PPC load: root=nfs Uncompressing Linux...done. Now booting the kernel and that's it. What should I see next? Should it init the network card? Will I see that? I have dhcp, tftp, nfs set up but I don't see any network activity on the host from the sandpoint using tcpdump. thanks for any pointers! Mark ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
