On Fri, Aug 24, 2001 at 03:23:10PM -0400, Brian Waite wrote: > > Ok now I moved up to a 2.4.9 kernel from the linuxppc_2_4_stable tree and I > see the same problem. Here is the output of debug being defined in both > drivers/pci.c and arch/ppc/kernel/pci.c. Below are the dumps of 2 boots, one > without the SCSI card attached and one with the SCSI card attached to the > baseboard. Does anything looks suspicious? This card did work on the base > under 2.2.18 when I initiaslly tested it.
Everything looks good...excepting the unassigned resource (which isn't used by the tulip driver anyway). I've never seen a hard hang except on a new bridge design bringup so you're going to have to trace the flow through all the resource assignment process. > PS I can't seem to get my 2.4 devel tree to boot on the 2400, the > decompress_kernel fails with fffffffd. I think Gabriel Paubert is the only other person I've seen using Linux on a 2400 lately...maybe he'll chime in. It could be a temporary effect of the bootloader reorg right now...prep is being touched. Regards, -- Matt Porter MontaVista Software, Inc. mporter at mvista.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
