Hi Pantelis, Are your drivers compatible with linux kernel 2.6.x ? I'll be interested to have a look at them if you don't mind.
Also, do you think an USB bus analyzer is a *must have* in order to work on the drivers ? Regards, Guillaume. Pantelis Antoniou wrote: > Wolfgang Denk wrote: > >> Dear Mike, >> >> in message <428995CB.4050301 at compulab.co.il> you wrote: >> >>> Do you know if the same is applicable to CPM2 USB controllers >>> present for example on mpc8247? >> >> >> >> Sorry, I don't know from personal experience. But from what I heard >> there might be some "surprises", too. >> >> >>> The Freescale sales representative we work with actually says that >>> CPM2 USB host controller is working well. >> >> >> >> Of course they do. They say the same for the 850 and 823 :-( >> >> Best regards, >> >> Wolfgang Denk >> > > Well I have USB host drivers for both 8xx & 82xx working. > > It was not a piece of cake exactly to get them to work > but they seem to work fine even under heavy traffic. > > However I use them connected to a specific peripheral > so I don't know how well they fare when used as a PC > style USB host controller. > > YMMV > > Regards > > Pantelis > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > -- ======================================= Guillaume Autran Senior Software Engineer MRV Communications, Inc. Tel: (978) 952-4932 office E-mail: gautran at mrv.com =======================================