On Thu, 2004-07-08 at 14:41, Wolfgang Denk wrote: > In message <1089289959.5996.66.camel at lucy.pep-kaufbeuren.de> you wrote: > > > > For the kernel, I use what's in your CVS: > > linuxppc_2_4_devel/drivers/video/mb86290 > > > > mb86290fb.c is at rev. 1.2 > > Should be fine. > > > The hardware and kernel are different, I'm using our homegrown > > EB8540 module on a EBC1 carrier board (in shops soon ;), which > > has a standard PCI slot to fit the Coral-P card. > > Is this a 3.3V or a 5V PCI slot? I think there is some 3.3V power > supply jumper on the Coral-P card - you may want to check this.
The carrier is configured for 3.3V. J52 is closed JP150 is 2-3 The output muxer is bypassed (+PDN EN) since there is no -12V. The voltage at JP150 2-3 is 3.265V. Btw, I've just heard that Fujitsu seems to have cancelled the low-cost successor of the Coral-P, the Lime. Bad news for us here :( -- Stefan Nickl Kontron Modular Computers ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
