MuthuGanesh M wrote: > What is there in your reg8xx.def? > > Regards, > Muthuganesh
Many thanks for the reply - I'd forgotten about that file! I'm using the standard reg860.def file as supplied with the Abatron debugger. Sample below: sp GPR 1 pc SPR 26 ; is SRR0 ; xer SPR 1 lr SPR 8 ctr SPR 9 dsisr SPR 18 dar SPR 19 dec SPR 22 srr0 SPR 26 srr1 SPR 27 ; cmpa SPR 144 [snip] I hope this provides sufficient to verify... -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks at tait.co.nz New Zealand ======================================================================= This email, including any attachments, is only for the intended addressee. It is subject to copyright, is confidential and may be the subject of legal or other privilege, none of which is waived or lost by reason of this transmission. If the receiver is not the intended addressee, please accept our apologies, notify us by return, delete all copies and perform no other act on the email. Unfortunately, we cannot warrant that the email has not been altered or corrupted during transmission. =======================================================================
