Dan Malek wrote: > > What other versions of the kernel have you used that seem to work OK?
so far, this is the only version I have gotten to boot completely. I have tried the montavista 2.2.14-1.2.2_1 kernel, but it crashes after loading the compressed ramdisk image with: RAMDISK: Compressed image found at block 0 Kernel panic: VFS: Free block list corrupted Rebooting in 180 seconds.. > > What is the silicon revision of the chip? It is a B5 revision > > What were you doing at the time you received this error? The "Oops: kernel access of bad area, sig: 11" occurs at a couple of different times. 1) sometimes on boot, it will occur right after kswapd is enabled, and hang the kernel completely. 2) Sometimes it occurs right after the: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Oops: kernel access of bad area, sig: 11 If it gets past these two spots (which is most of the time) it will get me to the bash# prompt. Once there, it randomly will Oops, but I can hit return, and be right back at the command prompt (it will Oops even if I just leave the machine idle and am not running any commands from the shell). I just recently came across some additional errors like this: bash# ls exec.c:278: bad pte 001709c9. exit_mmap: map count is 14 Segmentation fault Thanks for any help. Cheers, tim ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
