Navin, Outside of the O'Reilly book "Linux Device Drivers" I don't know if a good tutorial on writing serial device drivers. If you come across one I'd be very interested :-).
Good luck, Daris Nevil SNMC Navin Boppuri wrote: > Hello Daris, > > Thank you for the link. But all I see there is docs on how to talk to serial > ports. I need some linux data structures info. How is serial.c organized? > How can I port a new uart to serial.c ? etc. etc. Do you know of some place > I can find this? > > Thank you, > Navin Boppuri > > ----- Original Message ----- > From: "Daris Nevil" <dnevil at snmc.com> > To: "Navin Boppuri" <nboppuri at trinetcommunication.com> > Cc: <linuxppc-embedded at lists.linuxppc.org> > Sent: Tuesday, January 16, 2001 12:38 AM > Subject: Re: Serial driver help > > > Navin, > > > > Check out http://www.qslinux.org/docs/snmc/serial/index.html, as it may > have > > the info that you need. > > > > Regards, > > Daris Nevil > > SNMC > > > > Navin Boppuri wrote: > > > > > Hello, > > > > > > Can someone tell me where I can find some documentation on how to write > a > > > serial driver in linux using the serial.h and tty data structures? I am > > > using MAX3100 uart connected to the SPI controller. The SPI driver is > fine > > > works just fine. I do see that uart.c is written for uarts connected on > SMC > > > and SCC. All I need to do is to port it for SPI. > > > > > > Thank you, > > > Navin Boppuri > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
