Hey Dan, We just got done getting the 2.2.13 running on the RPX-lite. We had to add CONFIG_ENET_SCC2 to its config to make it work. Thanks for the update!
BTW: have you compiled any of these with CONFIG_MODULES turned on? We've tried with a couple of different kernels and generally get syntax errors from ppc_ksyms.c and, after fixing those, we get a bunch of unresolved symbols from kernel.o . We didn't dig very deep on this, we were just curious if it would work...apparently not. ;-) I'm wondering if anyone else has played with this? Oh well, we'll just go back to a static kernel and work from there, no big deal. Thanks Again, -Mark On Fri, 22 Oct 1999, Dan Malek wrote: > > I just put a tar image of 2.2.13 with the 8xx updates on > ppc.kernel.org. I needed it for a couple of real applications.... > > It has a few things in it that I have yet to check into the 2.3.xx > baseline. In particular there are a couple of 10/100 Ethernet > PHYs I want to ensure work properly. There are also CPM port > configurations I want to complete. > > I tested it on the MBX, BrightStar Engineering BSE-IP, and the > Embedded Planet RPX-CLLF. If you are using the CLLF, there is > some additional information about booting over the 10/100 Ethernet > on the FEC that may be helpful. Ask and I will post that in > a separate message so it doesn't get lost here. > > > > -- Dan > Mark S. Mathews AbsoluteValue Software Web: http://www.absoval.com P.O. Box 941149 e-mail: mark at absoval.com Maitland, FL 32794-1149 Phone: 407.644.8582 USA Fax: 407.539.1294 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
