I looked at the driver again and it looks like the TX and RX clock signals are board specific. I will also have to program the CMXFCR clock route register with the appropriate clocks. Am I on the right track here?
--- annamaya <annamaya at yahoo.com> wrote: > I was able to use the same driver on a PQ2-FADS > board > with an MPC8275 processor. Are you telling me that > some of these pins are board specific? Thanks for > your > help. > > --- Dan Malek <dan at embeddededge.com> wrote: > > > > > On Oct 13, 2004, at 10:49 AM, annamaya wrote: > > > > > ..... But my driver doesn't work and complains > > > about a TX timeout. I am sure I am missing > > something. > > > Can you suggest something that I could try? > > > > You are going to have to track down the clock and > > control signals for the FCC and make sure they are > > still connected the same way as the 8260. Sounds > > like they aren't. There are #defines at the top > of > > the > > driver file that map the GPIO pins to the FCC > > signals. > > > > > > -- Dan > > > > > > > > > _______________________________ > Do you Yahoo!? > Declare Yourself - Register online to vote today! > http://vote.yahoo.com > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded >