hi .. If you could send me the code and the config related doc . I could then be able to suggest you something. As per the understanding of the problem i guess you are not congiguring the interrupt controller properly. you have to use correct IRQ no for that ports then other configuration such as interrupt type, and whenever you service the interrupt you have to clear the interrupt etc are to be taken care ....Please see the interrupt controller register and do your settings correctly . If the same persists then you please send me the code and the documents then only i could give the exact explaination on this
----misbah Mirek23 wrote: > > Dear All, > > I use linux kernel 2.6 on ppc405 of my Avnet (xilinx like ml403) > evaluation board. > > I have setup the virtex-4 FPGA to deal with Themac and Serial interfaces. > As input/output devices I have chosen 8 LEDs and DIP Switches. > > With such a configuration I am able to control from Linux user > applications via GPIO driver the LEDs and DIP Switches. > > Right now I just wanted to make use of the interrupts. I have configured > the Dip switches to use interrupt. The interrupt accoures when the DIP > Switches state has changed. > > In the BSP generated by EDK 9.1 I see that macro : > > #define XPAR_DIP_SWITCHES_8BIT_INTERRUPT_PRESENT 1 > > has changed from zero to one. > The macro XPAR_INTC_MAX_NUM_INTR_INPUTS is set to 1 as it was before. This > is due to the fact that > TEMAC uses one interrupt line. > > Does it mean that DIP Switches do not use INTC interrupt controller? > How to handle the DIP Switches interrupt? > Does the Interrupt handler routine have to acknowledge the interrupt from > Dip Switches? > > Many thanks in advance for any hint on that. > > Best Regards > > Mirek > > > > > > -- View this message in context: http://www.nabble.com/Interrupts-on-xilinx-ml403-tf4117226.html#a11758237 Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
