Hi Grant, Takashi, Stephen,
I tried to correct the issues here, too. But unfortunately Xilinx EDK
uses such long #define macro names. I guess we have to leave it the way
it is?
From: Joachim Foerster <[EMAIL PROTECTED]>
(Patch for Linus' master branch, date 2007/08/08)
Signed-off-by: Joachim Foerster <[EMAIL PROTECTED]>
---
arch/ppc/syslib/virtex_devices.c | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c
index 62a9495..d0b04d6 100644
--- a/arch/ppc/syslib/virtex_devices.c
+++ b/arch/ppc/syslib/virtex_devices.c
@@ -121,6 +121,29 @@
}, \
}
+#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
+ .name = "ml403-ac97cr", \
+ .id = num, \
+ .num_resources = 3, \
+ .resource = (struct resource[]) { \
+ { \
+ .start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR,
\
+ .end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start =
XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_PLAYBACK_INTERRUPT_INTR, \
+ .end =
XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_PLAYBACK_INTERRUPT_INTR, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ { \
+ .start =
XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_RECORD_INTERRUPT_INTR, \
+ .end =
XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_RECORD_INTERRUPT_INTR, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }, \
+}
+
/* UART 8250 driver platform data table */
struct plat_serial8250_port virtex_serial_platform_data[] = {
#if defined(XPAR_UARTNS550_0_BASEADDR)
@@ -221,6 +244,11 @@ struct platform_device virtex_platform_devices[] = {
#if defined(XPAR_TFT_3_BASEADDR)
XPAR_TFT(3),
#endif
+
+ /* AC97 Controller Reference instances */
+#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
+ XPAR_AC97_CONTROLLER_REFERENCE(0),
+#endif
};
/* Early serial support functions */
--
1.5.2.4
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
