schardt schrieb: > First, many many thanks to Grant. My VirtexII Demo Board ist running a > 2.6. Linux :)) > > But now, i switched to a Virtex4-Board with Ethernet (Mini Module from > Avnet) > This will i used in my application, if i can handle it. :) > > Linux is up and running, the ethernet is detected as eth0, link led is on > but, and thats the problem, speed negotiating das not work.
Check the PHY configuration (i.e. the bootstrap pins on the PHY). And - if appropriate - read out the PHY configuration (MDIO) and see if it's correct. Regards, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
