Hello all. What are the steps to configure an MPC500B-Board to react on an IRQ (2)?
I have written a test-driver with this code-snippets, but the prozessor
hangs when loading the driver.
my __init-function looks like:
static int __init mod_init( void )
{
volatile static struct mpc52xx_intr __iomem *intr;
u32 intr_ctrl;
// ...
printk( "intmod.ko: interrupt init ");
if (request_irq(MPC52xx_IRQ2, intmod_isr, IRQF_SHARED , "intmod",
INTMOD_IRQ_BOARD) == -EBUSY)
printk("KO\n");
else
printk("OK\n");
intr = ioremap(MPC52xx_MBAR+MPC52xx_INTR_OFFSET, MPC52xx_INTR_SIZE);
// read - modify - write
intr_ctrl = in_be32(&intr->ctrl);
intr_ctrl &= 0xfff3ffff;
intr_ctrl |= 0x00080200;
out_be32(&intr->ctrl, intr_ctrl); // ERROR!
if(intr) iounmap(intr);
// ...
}
On the Line, marked with "ERROR!" the prozessor hangs and the kernel drops
out.
TIA: Silvio
Mit freundlichen Gruessen
Silvio Fricke
--
-- S. Fricke ----------------------------- MAILTO:[EMAIL PROTECTED] --
Diplom-Informatiker (FH)
Linux-Entwicklung JABBER: [EMAIL PROTECTED]
----------------------------------------------------------------------------
pgpF6IIgag01u.pgp
Description: PGP signature
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
