In message <[EMAIL PROTECTED]> you wrote: > > So changed $HOME/linuxppc_2_4_devel/arch/ppc/platforms/tqm5200.h > the following way:
Well, you have to unserstand *exactly* what the CPU and the board are doing - the MPC5200 has multiplexed pins, and if you select one function you lose a few others, so you must carefully check for conflicts. Probably you will have to disable some other functions. Also you have to usnerstand what the board is designed like - some ports have specific and reserved functions. Finally, there are such things like wrong baud rate on a serial port which may make you think it's not working while you are just using bad user mode settings. > Is it possible to reconfigure all PSC's as UART's ? Yes, it is. But you have to know what you are doing. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] All a hacker needs is a tight PUSHJ, a loose pair of UUOs, and a warm place to shift. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
