On 10/17/07, aauer1 <[EMAIL PROTECTED]> wrote: > I was able to look at the __log_buf variable with the JTAG cable. So, I > recognized that the kernel doesn't halt after the "No booting the kernel" > message. There are many output messages in the __log_buf variable until it > stops at with a "Kernel panic" because the rootfs is not found (but this is > the minor problem). > Now, I know that the kernel boots but I don't get an output with my Xilinx > UartLite module. Are there some kernel modules which must be activated?? > Btw. I have used the Linux-2.6-virtex kernel from > http://git.secretlab.ca/git/ and another Kernel (2.6.23 from kernel.org) - > both with the same result.
Post the output of __log_buf here please. g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded